Bathurst
 Richard J. Bathurst , P.Eng., Ph.D., FRSC, FEIC, FCAE, FCSCE
Professor (Emeritus)

Research Director, GeoEngineering Centre at Queen's-RMC

Civil Engineering Department, RMC, Kingston, Ontario 

Civil Engineering Department, Queen's University, Kingston, Ontario

President Engineering Institute of Canada (2016-2018)

President Canadian Geotechnical Society (2013-2014)

President International Geosynthetics Society (1998-2002)

President North American Geosynthetics Society (1997-1998)

Editor-in-Chief: Geosynthetics International

Editor-in-Chief: International Journal of Geomechanics

Associate Editor: Geotextiles and Geomembranes

Google Scholar 

 
E-mail:
 bathurst-r@rmc.ca

Dr. Bathurst (BSc., MSc., Ph.D. 1986 Queen's) is Professor Emeritus of Civil Engineering at the Royal Military College of Canada where he has taught since 1980. He also holds a cross-appointment with the Civil Engineering Department at Queen's University. He has been an Adjunct Professor of Civil Engineering at the University of Waterloo and Ryerson University (Canada) and Edith Cowan University in Australia. He was visiting Distinguished Scientist at King Abdulaziz University, Jeddah, Saudi Arabia in 2013-14. He was the recipient of a prestigious 2009 JSPS Invitation Fellowship from Japan and currently holds an appointment as Visiting Research Fellow at the Port and Airport Research Institute in Japan (2016-2026).

Dr. Bathurst is Past-President of the North American Geosynthetics Society, International Geosynthetics Society, Canadian Geotechnical Society and the Engineering Institute of Canada. He has authored or co-authored more than 230 papers in refereed journals (including the journal Nature), 20 book chapters and more than 250 contributions in conference proceedings.

Dr. Bathurst has made fundamental contributions to the areas of reinforcement geosynthetics, granular particle mechanics, railway ballast, transparent surrogate granular soils and numerical modelling of reinforced embankments and walls. His contributions also include themes related to earthquake geotechnical engineering, probabilistic design, instrumentation and testing of full-scale reinforced soil walls and embankments, geosynthetic materials testing and modelling, sustainability and soil-structure interaction. His work on mechanically stabilized earth (MSE) walls has led to fundamental changes to the authoritative AASHTO LRFD building code in the US. His contributions are heavily cited in the Canadian Highway Bridge Design Code (CHBDC) and the Canadian Foundation Engineering Manual (CFEM).

Current research activities are focused on the use of geosynthetic and metallic reinforcement in earth retaining wall systems, limit states design, probabilistic design of reinforced and unreinforced soil structures, and load and resistance factor design (LRFD) calibration. Dr. Bathurst has served on committees of the Canadian Highway Bridge Design Code and the National Building Code of Canada, and AASHTO in the US. Dr. Bathurst is Editor-in-Chief of the peer-reviewed technical journal Geosynthetics International which is an official journal of the International Geosynthetics Society and published by ICE/Emerald Publishing, Editor-in-Chief of the ASCE International Journal of Geomechanics, and an Associate Editor of the technical journal Geotextiles and Geomembranes which is also an official journal of the International Geosynthetics Society.

He has received best paper awards for contributions to peer-reviewed technical journals including: ASCE Geo-Institute Thomas A. Middlebrooks Award (2021); ASTM Hogentogler Award (2013); R.M. Quigley Award of the CGS (2015, 2008, 2007 and 2004), Honourable Mention (2023, 2019 and 2003); Crampton Prize of the UK Institution of Civil Engineers (2017); Gzowski Medal of the Canadian Society of Civil Engineering (2009 and 2006), Honourable Mention (2003); Georisk (2011 and 2021); Geotextiles and Geomembranes (2023, 2021, 2014, 2011, 2005 and 2000), Honourable Mention (2013 and 2010); Geosynthetics International (2023); Soils and Foundations (2012). 

Dr. Bathurst has delivered the following distinguished named lectures: ASCE Sowers Lecture and Kersten Lecture in 2017; 2017 R.M. Hardy Lecture of the Canadian Geotechnical Society; 2014 Giroud Lecture of the International Geosynthetics Society (IGS) (senior lecture of the IGS); and 2002 Mercer Lecture (ISSMGE-IGS-Tensar). He has delivered more that 50 keynotes, invited lectures, courses and webinars in Canada and internationally.  He is currently the 2024-2025 ASCE Geo-Institute Cross USA Lecturer. 

In recognition of his technical contributions he was the recipient of: 2016 Legget Medal of the Canadian Geotechnical Society (CGS) (senior award of the CGS); 2015 Meyerhof Award (CGS); 2002 Geosynthetics Division Award; 2003 CGS Cross-Country Lecture; and the IGS Gold Medal Award (now called the IGS Technical Award) in 2023, 2010, 1998 and 1994, which is the highest technical award of the IGS. He was awarded the 2024 Julian C. Smith Medal of the EIC "For achievement in the development of Canada".

In 2021 Dr. Bathurst was awarded the IGS "Bathurst Lecture" in recognition of his contributions in the area of soil reinforcement. The lecture is to be delivered by a suitably qualified expert commencing at the 12th International Conference on Geosynthetics (ICG) in Rome in September 2023, and every four years thereafter. 

Dr. Bathurst is a Fellow of the Canadian Academy of Engineering, Engineering Institute of Canada and Canadian Society for Civil Engineering, and was elected Honorary Foreign Member of the Japanese Geotechnical Society in 2019.  In 2017 he was elected Fellow of the Royal Society of Canada which is the highest academic award in Canada.

LIST OF PUBLICATIONS

REFEREED, SCHOLARLY JOURNALS

  1. Bathurst, R.J., Miyata, Y. and Allen T.M. 2025. LRFD calibration of internal limit states for polymer (PET) strap MSE walls. ASCE Journal of Geotechnical and Geoenvironmental Engineering 151(1): 04024140 (https://doi.org/10.1061/JGGEFK.GTENG-12843)
  2. Naftchali, F.M. and Bathurst, R.J. 2024. Numerical modelling of reinforced fill over a void considering rate-dependent stiffness of the reinforcement. Geotextiles and Geomembranes 52(4): 635-653 (https://doi.org/10.1016/j.geotexmem.2024.03.006)
  3. Bathurst, R.J. and Jamshidi Chenari, R. 2024. Estimation of confidence in the calculated resistance factor for simple limit states with limited data for load and resistance model bias. Canadian Geotechnical Journal 61(9): 1968-1976 (https://cdnsciencepub.com/doi/10.1139/cgj-2023-0424)
  4. Bathurst, R.J. and Jamshidi Chenari, R. 2024. Influence of data sampling on confidence in the calculation of reliability index for simple performance functions. Computers and Geotechnics 166: 105952 (https://doi.org/10.1016/j.compgeo.2023.105952)
  5. Mardani, A., Abbaspour, A., Tanyu, B.F., Siemens, G.,  Bathurst, R.J. and Likos, W. 2024. Large-scale hydraulic perormance testing of a geotextile mechanically stabilized earth (MSE) wall constructed with recycled concrete aggregate backfill.  ASTM Geotechnical Testing Journal (online) 47(1) (https://doi.org/10.1520/GTJ20220257)
  6. Bathurst, R.J. and Naftchali, F.M. 2023. Probabilistic analysis for the reinforced fill over void problem. Geosynthetics International (online AoP in press) (https://doi.org/10.1680/jgein.23.00067)
  7. Moncada, A., Damians, I.P., Olivella, S. and Bathurst, R.J. 2023. Thermo-hydraulic numerical modelling of in-soil conditions in reinforced soil walls. Geosynthetics International (online AoP in press) (https://doi.org/10.1680/jgein.23.00026) 
  8. Jamshidi Chenari, R. and Bathurst, R.J. 2023. Bearing capacity of strip footings seated on unreinforced and geosynthetic reinforced granular layers over spatially variable soft clay deposits. ASCE Journal of Geotechnical and Geoenvironmental Engineering 149(6): 04023034   (https://doi.org/10.1061/JGGEFK.GTENG-10889)
  9. Bathurst, R.J. and Allen, T.M. 2023. LRFD calibration for soil failure limit state using the Stiffness Method. Canadian Geotechnical Journal 60(7): 1006-1014 (https://doi.org/10.1139/cgj-2022-0499) Honourable Mention for R.M. QUIGLEY AWARD of the Canadian Geotechnical Society
  10. Naftchali, F.M. and Bathurst, R.J. 2023. Influence of geosynthetic stiffness on analytical solutions for reinforced fill over void. Geosynthetics International 30(1): 95-107 (https://doi.org/10.1680/jgein.21.00015a). Best Paper Award
  11. Bathurst, R.J. and Naftchali, F.M. 2023. Influence of uncertainty in geosynthetic stiffness on deterministic and probabilistic analyses using analytical solutions for three reinforced soil problems. Geotextiles and Geomembranes 51(1): 117-130 (https://doi.org/10.1016/j.geotexmem.2022.10.002) Best Paper Award
  12. Jamshidi Chenari, R. and Bathurst, R.J. 2023. Influence of geosynthetic stiffness on bearing capacity of strip footings seated on thin reinforced granular layers over undrained soft clay. Geotextiles and Geomembranes 51(1): 43-55 (https://doi.org/10.1016/j.geotexmem.2022.09.006) 
  13. Lin, P. and Bathurst, R.J.  2022. LRFD calibration of facing limit states for soil nail walls.  ASCE Journal of Geotechnical and Geoenvironmental Engineering 148(11): 04022094 (https://orcid.org/0000-0002-5176-5287)  
  14. Kondo, A., Takano, D., Kohama, E. and Bathurst, R.J. 2022. Visualization of pile penetration using mechanoluminescent-coated particles. Geotechnique Letters 12(3) 6 p. (https://doi.org/10.1680/jgele.21.00069)
  15. Bathurst, R.J. and Naftchali, F.M. 2022. Response to discussion by S. H. Mirmoradi and M. Ehrlich on “Geosynthetic reinforcement stiffness for analytical and numerical modelling of reinforced soil structures” by Richard J. Bathurst and Fahimeh M. Naftchali, Geotextiles and Geomembranes 49 (2021) 921–940 Geotextiles and Geomembranes 50(4): 838-844  (https://doi.org/10.1016/j.geotexmem.2022.03.003)
  16. Rezai Soufi, G., Jamshidi Chenari, R. and Bathurst, R.J. 2022. Seismic bearing capacity of geosynthetic reinforced strip footings using upper bound limit analysis. ASCE International Journal of Geomechanics 22(3): 04021300  (https://doi.org/10.1061/(ASCE)GM.1943-5622.0002292). Editor's Choice 
  17. Damians, I.P., Olivella, S., Bathurst, R.J., Lloret, A. and Josa, A. 2022. Modelling soil-facing interface interaction with continuum element methodology. Frontiers in Built Environment (8): 21 p (https://doi.org/10.3389/fbuil.2022.842495).
  18. Low, B.K. and Bathurst, R.J. 2022. Load-resistance duality and case-specific sensitivity in reliability-based design. Acta Geotechnica 17:3067–3085 (https://doi.org/10.1007/s11440-021-01394-4).
  19. Bozorgzadeh, N. and Bathurst, R.J. 2022. Heirarchical Bayesian approaches to statistical modelling of geotechnical data. Georisk 16(3): 452-469. (https://doi.org/10.1080/17499518.2020.1864411). 
  20. Bathurst, R.J., Bozorgzadeh, N. and Allen, T.M. 2021. LRFD calibration of internal limit states for MSE walls using steel strip reinforcement. ASCE Journal of Geotechnical and Geoenvironmental Engineering 147(12): 04021156 (https://doi.org/10.1061/(ASCE)GT.1943-5606.0002678).
  21. Bathurst, R.J. and Allen, T.M. 2021. Reliability assessment of internal stability limit states for two as-built geosynthetic MSE walls. ISSMGE International Journal of Geoengineering Case Histories 6(4): 67-84 (https://www.geocasehistoriesjournal.org/pub/article/view/IJGCH_6_4_5).
  22. Bathurst, R.J. and Naftchali, F.M. 2021. Geosynthetic reinforcement stiffness for analytical and numerical modelling of reinforced soil structures. Geotextiles and Geomembranes 49(4):  921-940. (https://doi.org/10.1016/j.geotexmem.2021.01.003). Best Paper Award
  23. Bathurst, R.J., Bozorgzadeh, N., Miyata, Y. and Allen, T.M. 2021. Reliability-based design and analysis for internal limit states of steel grid-reinforced mechanically stabilized earth walls. Canadian Geotechnical Journal 58(5): 695-710 (https://doi.org/10.1139/cgj-2019-0820).
  24. Bozorgzadeh, N. and Bathurst, R.J. 2021. A Bayesian approach to reliability of MSE walls. Georisk 15(1): 1-11 (https://doi.org/10.1080/17499518.2019.1666999).
  25. Damians, I.P., Bathurst, R.J., Olivella, S., Lloret, A. and Josa, A. 2021. 3D modelling of strip reinforced MSE walls. Acta Geotechnica 16: 711–730 (view only: https://rdcu.be/b6sjL) (https://doi.org/10.1007/s11440-020-01057-w).
  26. Nonoyama, H., Miyata, Y and Bathurst, R.J. 2021. Deformation/damage/post failure analysis method of reinforced soil walls using SPH method. Journal of Japan Society of Civil Engineers, Ser.A2 (Applied Mechanics) 77(1): 35-45. (in Japanese).
  27. Bathurst, R.J., Miyata, Y. and Allen, T.M. 2020. Deterministic and probabilistic assessment of margins of safety for internal stability of as-built PET strap reinforced soil walls. Geotextiles and Geomembranes 48: 780-792 (https://doi.org/10.1016/j.geotexmem.2020.06.001).
  28. Bozorgzadeh, N., Bathurst, R.J. and Allen, T.M. 2020. Influence of corrosion on reliability-based design of steel grid MSE walls. Structural Safety 84: 101914 (https://dx.doi.org/10.1016/j.strusafe.2019.101914).
  29. Bozorgzadeh, N., Bathurst, R.J., Allen, T.M. and Miyata, Y. 2020. Reliability-based analysis of internal limit states for MSE walls using steel strip reinforcement. ASCE Journal of Geotechnical and Geoenvironmental Engineering 146(1): 0401911 (https://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0002192).
  30. Bozorgzadeh, N. and Bathurst, R.J. 2019. Bayesian model checking, comparison and selection with emphasis on outlier detection for geotechnical reliability-based design. Computers and Geotechnics 116: 103181 (https://doi.org/10.1016/j.compgeo.2019.103181).
  31. Allen, T.M. and Bathurst, R.J. 2019. Geosynthetic reinforcement stiffness characterization for MSE wall design. Geosynthetics International 26(6): 592–610 (https://dx.doi.org/10.1680/jgein.19.00041).
  32. Kondo, A., Takano, D., Kohama, E. and Bathurst, R.J. 2019. Visualization and measurement of load transmission in granular assemblies using mechanoluminescent-coated particles. Granular Matter 21:50 (https://doi.org/10.1007/s10035-019-0907-5).
  33. Miyata, Y., Bathurst, R.J. and Allen, T.M. 2019. Calibration of PET strap pullout models using a statistical approach. Geosynthetics International 26(4): 413–427 (http://dx.doi.org/10.1680/jgein.19.00026).
  34. Bathurst, R.J., Allen, T.M., Lin, P. and Bozorgzadeh, N. 2019. LRFD calibration of internal limit states for geogrid MSE walls. ASCE Journal of Geotechnical and Geoenvironmental Engineering 145(11):04019087 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0002124). Editor's Choice & 2021 ASCE Geo-Institute Thomas A. Middlebrooks Award
  35. Bathurst, R.J., Allen, T.M., Miyata, Y., Javankhoshdel, S. and Bozorgzadeh, N. 2019.  Performance-based analysis and design for internal stability of MSE walls. Georisk 13(3): 214-225 (https://doi.org/10.1080/17499518.2019.1602879).
  36. Allen, T.M., Bathurst, R.J. and Bozorgzadeh, N. 2019. Probabilistic tensile strength analysis of steel strips in MSE walls considering corrosion. ASCE Journal of Geotechnical and Geoenvironmental Engineering 145:5 04019016-1-12 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0002043).
  37. Bathurst, R.J., Lin, P. and Allen, T.M. 2019. Reliability-based design of internal limit states for mechanically stabilized earth walls using geosynthetic reinforcement. Canadian Geotechnical Journal 56(6): 774-788 (https://doi.org/10.1139/cgj-2018-0074). Editor's Choice & Honourable Mention for R.M. QUIGLEY AWARD of the Canadian Geotechnical Society
  38. Miyata, Y. and Bathurst, R.J. 2019. Statistical assessment of load model accuracy for steel grid reinforced soil walls. Acta Geotechnica 14: 57-70 (http://dx.doi.org/10.1007/s11440-018-0638-5).
  39. Lin, P. and Bathurst, R.J. 2019. Calibration of resistance factors for load and resistance factor design of internal limit states of soil nail walls. ASCE Journal of Geotechnical and Geoenvironmental Engineering 145:1 04018100 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0002005).
  40. Tada, T., Miyata, Y. and Bathurst, R.J. 2018. Energy grade line analysis of tsunami run-up on the Sendai Plain after the 2011 Tohoku Earthquake. Coastal Engineering 140: 306-315 (https://doi.org/10.1016/j.coastaleng.2018.08.010).
  41. Miyata, Y., Bathurst, R.J. and Allen, T.M. 2018. Evaluation of tensile load model accuracy for PET strap MSE walls. Geosynthetics International 25(6): 656-671 (http://dx.doi.org/10.1680/jgein.18.00032).
  42. Luo, N. and Bathurst, R.J. 2018. Deterministic and random FEM analysis of full-scale unreinforced and reinforced embankments. Geosynthetics International 25(2): 164-179 (http://dx.doi.org/10.1680/jgein.17.00040).
  43. Damians, I.P., Bathurst, R.J., Adroguer, E.G., Josa, A. and Lloret, A. 2018. Sustainability assessment of earth retaining wall structures. Environmental Geotechnics 5(4): 187-203 (http://dx.doi.org/10.1680/jenge.16.00004).
  44. Siemens, G.A., Bathurst, R.J. and Miyata, Y. 2018. Numerical simulation and parametric analysis of multi-anchor walls using the finite element method. Transportation Geotechnics 15: 57-69 (http://dx.doi.org/10.1016/j.trgeo.2018.04.001).
  45. Allen, T.M. and Bathurst, R.J. 2018. Application of the Simplified Stiffness Method to design of reinforced soil walls. ASCE Journal of Geotechnical and Geoenvironmental Engineering 144(5): 04018024 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001874).
  46. Lin, P. and Bathurst, R.J. 2018. Reliability-based internal limit states analysis and design of soil nails using different load and resistance models. ASCE Journal of Geotechnical and Geoenvironmental Engineering 144(5): 04018022 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001862).
  47. Miyata, Y., Yu, Y. and Bathurst, R.J. 2018. Calibration of soil-steel grid pullout models using a statistical approach. ASCE Journal of Geotechnical and Geoenvironmental Engineering 144(2): 04017106 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001811).
  48. Javankhoshdel, S., Bathurst, R.J. and Cami, B. 2018. Influence of model type, bias and input parameter variability on reliability analysis for simple limit states with two load terms. Computers and Geotechnics 97: 78–89 (http://dx.doi.org/10.1016/j.compgeo.2018.01.002).
  49. Bathurst, R.J. and Yu, Y. 2018. Probabilistic prediction of reinforcement loads for steel MSE walls using a response surface method. ASCE International Journal of Geomechanics 18(5): 04018027 (http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0001120).
  50. Luo, N. and Bathurst, R.J. 2018. Probabilistic analysis of reinforced slopes using RFEM and considering spatial variability of frictional soil properties due to compaction. Georisk 12(2): 87-108 (https://doi.org/10.1080/17499518.2017.1362443).
  51. Lin, P. and Bathurst, R.J. 2018. Influence of cross-correlation between nominal load and resistance on reliability-based design for simple linear soil-structure limit states. Canadian Geotechnical Journal 55(2): 279-295 (http://dx.doi.org/10.1139/cgj-2016-0012).
  52. Matsumura, S., Kobayashi, T., Mizutani, T. and Bathurst, R.J. 2017. Manufacture of bonded granular soil using X-ray CT scanning and 3D printing. ASTM Geotechnical Testing Journal 40(6): 1000-1010 (https://doi.org/10.1520/GTJ20160273).
  53. Yu, Y. and Bathurst, R.J. 2017. Probabilistic assessment of reinforced soil wall performance using response surface method. Geosynthetics International 24(5): 524–542 (http://dx.doi.org/10.1680/jgein.17.00019).
  54. Luo, N. and Bathurst, R.J. 2017. Reliability bearing capacity analysis of footings on cohesive soil slopes using RFEM. Computers and Geotechnics 89: 203-212 (http://dx.doi.org/10.1016/j.compgeo.2017.04.013).
  55. Bathurst, R.J. and Ezzein, F.M. 2017. Insights into geogrid-soil interaction using a transparent granular soil. Geotechnique Letters 7: 1-5 (http://dx.doi.org/10.1680/jgele.16.00191).
  56. Yu, Y., Bathurst, R.J. and Allen, T.M. 2017. Numerical Modelling of two full-scale reinforced soil wrapped-face walls. Geotextiles and Geomembranes 45(4): 237-249 (http://dx.doi.org/10.1016/j.geotexmem.2016.02.004).
  57. Bathurst, R.J., Javankhoshdel, S. and Allen, T.M. 2017. LRFD calibration of simple soil-structure limit states considering method bias and design parameter variability. ASCE Journal of Geotechnical and Geoenvironmental Engineering 143(9): 04017053-1-14 (https://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001735).
  58. Bathurst, R.J. and Javankhoshdel, S. 2017. Influence of model type, bias and input parameter variability on reliability analysis for simple limit states in soil-structure interaction problems. Georisk 11(1): 42-54 (http://dx.doi.org/10.1080/17499518.2016.1154160).
  59. Javankhoshdel, S. and Bathurst, R.J. 2017. Deterministic and probabilistic failure analysis of simple geosynthetic reinforced soil slopes. Geosynthetics International 24(1): 14-29 (http://dx.doi.org/10.1680/jgein.16.00012).
  60. Lin, P., Bathurst, R.J., Javankhoshdel, S. and Liu, J. 2017. Statistical analysis of the Effective Stress Method and modifications for prediction of ultimate bond strength of soil nails. Acta Geotechnica 12(1): 171-182 (http://dx.doi.org/10.1007/s11440-016-0477-1).
  61. Yu, Y. and Bathurst, R.J. 2017. Modelling of geosynthetic-reinforced column-supported embankments using 2D full-width model and modified unit cell approach. Geotextiles and Geomembranes 45(2): 103-120 (http://dx.doi.org/10.1016/j.geotexmem.2017.01.002).
  62. Yu, Y. and Bathurst, R.J. 2017. Influence of selection of soil and interface properties on numerical results of two soil-geosynthetic interaction problems. ASCE International Journal of Geomechanics 17(6):04016136 (http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000847).
  63. Javankhoshdel, S., Luo, N. and Bathurst, R.J. 2017. Probabilistic analysis of simple slopes with cohesive soil strength using RLEM and RFEM. Georisk 11(3): 231-246 (http://dx.doi.org/10.1080/17499518.2016.1235712). Georisk Most Cited Paper Award 2020
  64. Damians, I.P., Bathurst, R.J., Adroguer, E.G., Josa, A. and Lloret, A. 2017. Environmental assessment of earth retaining wall structures. Environmental Geotechnics 4(6): 415-431 (http://dx.doi.org/10.1680/jenge.15.00040).
  65. Lin, P., Bathurst, R.J. and Liu, J. 2017. Statistical evaluation of the FHWA simplified method and modifications for predicting soil nail loads. ASCE Journal of Geotechnical and Geoenvironmental Engineering 143(3): 04016107-1-11 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001614).
  66. Yu, Y., Bathurst, R.J., Allen, T.M. and Nelson, R. 2016. Physical and numerical modelling of a geogrid reinforced incremental concrete panel retaining wall. Canadian Geotechnical Journal 53(12): 1883-1901 (http://dx.doi.org/10.1139/cgj-2016-0207).
  67. Lin, B-H., Yu, Y., Bathurst, R.J. and Liu, C-N. 2016. Deterministic and probabilistic prediction of facing deformations of geosynthetic-reinforced MSE walls using a response surface approach. Geotextiles and Geomembranes 44: 813-823 (http://doi:10.1016/j.geotexmem.2016.06.013).
  68. Allen, T.M. and Bathurst, R.J. 2016. Closure to "Improved Simplified Method for Prediction of Loads in Reinforced Soil Walls" by Tony M. Allen and Richard J. Bathurst. ASCE Journal of Geotechnical and Geoenvironmental Engineering (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001549).
  69. Luo, N., Bathurst, R.J. and Javankhoshdel, S. 2016. Probabilistic stability analysis of simple reinforced slopes by finite element method. Computers and Geotechnics 77: 45-55 (http://dx.doi.org/10.1016/j.compgeo.2016.04.001).
  70. Yu, Y., Bathurst, R.J. and Damians, I.P. 2016. Modified unit cell approach for modelling geosynthetic-reinforced column-supported embankments. Geotextiles and Geomembranes 44(3): 332-343 (http://dx.doi.org/10.1016/j.geotexmem.2016.01.003).
  71. Yu, Y., Bathurst, R.J. and Allen, T.M. 2016. Numerical modelling of the SR-18 geogrid reinforced modular block retaining walls. ASCE Journal of Geotechnical and Geoenvironmental Engineering 142(5): 04016003 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001438).
  72. Damians, I.P., Bathurst, R.J., Josa, A. and Lloret, A. 2016. Vertical facing panel-joint gap analysis for steel-reinforced soil walls. ASCE International Journal of Geomechanics 16(4): 04015103 (http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000632).
  73. Javankhoshdel, S. and Bathurst, R.J. 2016. Influence of cross-correlation between soil parameters on probability of failure of simple cohesive and c-φ slopes. Canadian Geotechnical Journal 53(5): 839-853 (http://dx.doi.org/10.1139/cgj-2015-0109).
  74. Bathurst, R.J. and Ezzein, F.M. 2016. Geogrid pullout load-strain behaviour and modelling using a transparent granular soil. Geosynthetics International 23(4): 271-286 (http://dx.doi.org/10.1680/jgein.15.00051).
  75. Bathurst, R.J., Miyata, Y., Otani, Y., Ohta, Y. and Miyatake, H. 2016. Stability of steel reinforced soil walls after footing failure. Geotechnical Engineering 169(1): 25-34 (http://dx.doi.org/10.1680/jgeen.15.00050).(open access)
  76. Fenton, G.A., Naghibi, F., Dundas, D., Bathurst, R.J. and Griffiths, D.V. 2016. Reliability-based geotechnical design in the 2014 Canadian Highway Bridge Design Code. Canadian Geotechnical Journal 53(2): 236-251 (http://dx.doi.org/10.1139/cgj-2015-0158).
  77. Miyata, Y. & Bathurst, R.J. 2016. Revised design models for geogrid reinforced soils walls and LRFD calibration. Journal of the Society of Materials Science, Japan. 65(1): 40-43 (in Japanese).
  78. Bathurst, R.J., Miyata, Y., Konami, T. and Miyatake, H. 2015. Stability of multi-anchor soil walls after loss of toe support. Geotechnique 65(11): 945-951 (http://dx.doi.org/10.1680/jgeot.15.P.041).
  79. Iskander, M, Bathurst, R.J. and Omidvar, M. 2015. Past, present and future of physical modeling with transparent soils. ASTM Geotechnical Testing Journal 38(5): 557-573 (http://dx.doi.org/10.1520/GTJ20150079).
  80. Miyata, Y., Bathurst, R.J., Otani, Y., Ohta, H. and Miyatake, H. 2015. Influence of transient flooding on steel strip reinforced soil walls. Soils and Foundations 55(4): 881-894 (http://dx.doi.org/10.1016/j.sandf.2015.06.018).
  81. Allen, T.M. and Bathurst, R.J. 2015. An improved simplified method for prediction of loads in reinforced soil walls. ASCE Journal of Geotechnical and Geoenvironmental Engineering 141(11): 04015049 (http://ascelibrary.org/doi/10.1061/%28ASCE%29GT.1943-5606.0001355).
  82. Yu, Y., Bathurst, R.J. and Miyata, Y. 2015. Numerical analysis of a mechanically stabilized earth wall reinforced with steel strips. Soils and Foundations 55(3): 536-547 (http://dx.doi.org/10.1016/j.sandf.2015.04.006).
  83. Miyata, Y., Bathurst, R.J. and Miyatake, H. 2015. Performance of three geogrid reinforced soil walls before and after foundation failure. Geosynthetics International 22(4): 311-326 (http://dx.doi.org/10.1680/gein.15.00014).
  84. Bathurst, R.J. and Miyata, Y. 2015. Reliability-based analysis of combined installation damage and creep for the tensile rupture limit state of geogrid reinforcement in Japan. Soils and Foundations 55(2): 437-446 (http://dx.doi.org/10.1016/j.sandf.2015.02.017).
  85. Miyata, Y. and Bathurst, R.J. 2015. Reliability analysis of geogrid installation damage test data in Japan. Soils and Foundations 55(2): 393-403 (http://dx.doi.org/10.1016/j.sandf.2015.02.013).
  86. Bathurst, R.J. and Ezzein, F.M. 2015. Geogrid and soil displacement observations during pullout using a transparent granular soil. ASTM Geotechnical Testing Journal 38(5): 673-685 (http://dx.doi.org/10.1520/GTJ20140145).
  87. Yu, Y., Damians, I.P. and Bathurst, R.J. 2015. Influence of choice of FLAC and PLAXIS interface models on reinforced soil-structure interactions. Computers and Geotechnics 65: 164-174 (http://dx.doi.org/10.1139/cgj-2014-0468)
  88. Yu, Y. and Bathurst, R.J. 2015. Analysis of soil-steel bar mat pullout models using a statistical approach. ASCE Journal of Geotechnical and Geoenvironmental Engineering 141(5): 04015006 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001281).
  89. Javankhoshdel, S. and Bathurst, R.J. 2015. Reply to the discussion by Ni et al. on "Simplified probabilistic slope stability design charts for cohesive and cohesive-frictional (c-phi) soils. Canadian Geotechnical Journal 52(2): 252 (http://dx.doi.org/10.1139/cgj-2014-0418).
  90. Damians, I.P., Bathurst, R.J., Josa, A. and Lloret, A. 2015. Numerical analysis of an instrumented steel reinforced soil wall. ASCE International Journal of Geomechanics15(1): 04014037 (http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000394).
  91. Ezzein, F., Bathurst, R.J. and Kongkitkul, W. 2015. Non-linear load-strain modelling of polypropylene geogrids during constant rate-of-strain loading. Polymer Engineering and Science 55(7):1 617-1627 (http://dx.doi.org/10.1002/pen.23999).
  92. Santos, E.C.G., Palmeira, E.M. and Bathurst, R.J. 2014. Performance of two geosynthetic reinforced walls with recycled construction waste backfill and constructed on collapsible ground. Geosynthetics International 21(4):256-269 (http://dx.doi.org/10.1680/gein.14.00013).
  93. Javankhoshdel, S. and Bathurst, R.J. 2014. Simplified probabilistic slope stability design charts for cohesive and c-phi soils. Canadian Geotechnical Journal 51(9): 1033-1045 (http://dx.doi.org/10.1139/cgj-2013-0385).
  94. Ezzein, F. and Bathurst, R.J. 2014. A new approach to evaluate soil-geosynthetic interaction using a novel pullout test apparatus and transparent granular soil. Geotextiles and Geomembranes 42(3): 246-255 (http://dx.doi.org/10.1016/j.geotexmem.2014.04.003) (open access).
  95. Miyata, Y., Bathurst, R.J. and Allen, T.M. 2014. Reliability analysis of geogrid creep data in Japan. Soils and Foundations 54(4):608-620 (http://dx.doi.org/10.1016/j.sandf.2014.06.004).
  96. Damians, I.P., Bathurst, R.J., Josa, A. and Lloret, A. 2014. Numerical study of the influence of foundation compressibility and reinforcement stiffness on the behavior of reinforced soil walls. International Journal of Geotechnical Engineering 8(3): 247-259 (http://dx.doi.org/10.1179/1939787913Y.0000000039).
  97. Allen, T.M. and Bathurst, R.J. 2014. Performance of a 11 m high block-faced geogrid wall designed using the K-stiffness Method. Canadian Geotechnical Journal 51(1):16-29 (http://dx.doi.org/10.1139/cgj-2013-0261).
  98. Allen, T.M. and Bathurst, R.J. 2014. Design and performance of a 6.3 m high block-faced geogrid wall designed using the K-stiffness Method. ASCE J Geotechnical and Geoenvironmental Engineering 142(2): 04013016 (http://dx.doi.org/10.1061/(ASCE)GT.1943-5606.0001013).
  99. Santos, E.C.G., Palmeira, E.M. and Bathurst, R.J. 2013. Behaviour of a geogrid reinforced wall built with recycled construction and demolition waste backfill on a collapsible foundation. Geotextiles and Geomembranes 39: 9 -19. Best Paper Honourable Mention
  100. Damians, I.P. Bathurst, R.J., Josa, A., Lloret, A. and Albuquerque, P.J.R. 2013. Vertical facing loads in steel reinforced soil walls. ASCE J Geotechnical and Geoenvironmental Engineering 139(9): 1419-1432.
  101. Bathurst, R.J. and Zarnani, S. 2013. Earthquake load attenuation using EPS geofoam buffers in rigid wall applications (invited State of the Art/Practice Paper). Indian Geotechnical Journal 43(4): 283-291.
  102. Shukla, S.K. and Bathurst, R.J. 2012. An analytical expression for the dynamic active thrust from c-f soil backfill on retaining walls with wall friction and adhesion. Geomechanics and Engineering 4(3): 209-218.
  103. Miyata, Y. and Bathurst, R.J. 2012. Reliability analysis of soil-geogrid pullout models in Japan. Soils and Foundations 52(4): 620-633.
  104. Bathurst, R.J., Huang, B. and Allen, T.M. 2012. LRFD calibration of the ultimate pullout limit state for geogrid reinforced soil retaining walls. ASCE International Journal of Geomechanics, Special Issue on Geosynthetics 12(4): 399-413.
  105. Miyata, Y. and Bathurst, R.J. 2012. Analysis and calibration of default steel strip pullout models used in Japan. Soils and Foundations 52(3): 481-497.
  106. Huang, B., Bathurst, R.J. and Allen, T.M. 2012. Load and resistance factor design (LRFD) calibration for steel strip reinforced soil walls. ASCE Journal of Geotechnical and Geoenvironmental Engineering 138(8): 922-933.
  107. Miyata, Y. and Bathurst, R.J. 2012. Measured and predicted loads in steel strip reinforced c-f soil walls in Japan. Soils and Foundations 52(1): 1-17.
  108. Bathurst, R.J., Huang, B. and Allen, T.M. 2012. Interpretation of laboratory creep testing for reliability-based analysis and load and resistance factor design (LRFD) calibration. Geosynthetics International 19(1): 39-53.
  109. Bathurst, R.J., Nernheim, A. and Allen, T.M. 2011 Response to Discussion of " Predicted Loads in Steel Reinforced Soil Walls Using the AASHTO Simplified Method" by Bathurst, R.J., Nernheim, A. and Allen,T.M. 2009; 135(2): 177-184, ASCE Journal of Geotechnical and Geoenvironmental Engineering 137(6): 1307-1310.
  110. Zarnani, S., El-Emam, M.M. and Bathurst, R.J. 2011. Comparison of numerical and analytical solutions for reinforced soil wall shaking table tests. Geomechanics and Engineering 3(4): 291-321.
  111. Bathurst, R.J., Miyata, Y. and Konami, T. 2011. Limit states design calibration for internal stability of multi-anchor walls. Soils and Foundations 51(6): 1051-1064.
  112. Miyata, Y., Bathurst, R.J. and Konami, T. 2011. Evaluation of two anchor plate capacity models for MAW systems. Soils and Foundations 51(5): 885-895.
  113. Ezzein, F. and Bathurst, R.J. 2011. A transparent sand for geotechnical laboratory modeling. ASTM Geotechnical Testing Journal 34(6):590-601.
  114. Bathurst, R.J., Huang, B. and Allen, T.M. 2011. Load and resistance factor design (LRFD) calibration for steel grid reinforced soil walls.Georisk 5(3-4): 218-228.
  115. Bathurst, R.J., Huang, B. and Allen, T.M. 2011. Analysis of installation damage tests for LRFD calibration of reinforced soil structures. Geotextiles and Geomembranes, Vol. 29, No. 3, pp. 323-334.
  116. Miyata, Y., Bathurst, R.J., Konami, T. and Dobashi, K. 2010. Influence of transient flooding on multi-anchor walls. Soils and Foundations 50(3): 371-382.
  117. Huang, B., Bathurst, R.J., Hatami, K. and Allen, T.M. 2010. Influence of toe restraint on reinforced soil segmental walls. Canadian Geotechnical Journal, Vol. 47, No.8, pp. 885-904.
  118. Siemens, G. and Bathurst, R.J. 2010. Numerical parametric investigation of infiltration in one-dimensional sand-geotextile columns. Geotextiles and Geomembranes, Vol. 28, pp. 460-476. Best Paper Honourable Mention
  119. Bathurst, R.J. and Huang, B. 2010. A geosynthetic modular block connection creep test apparatus, methodology and interpretation. ASTM Geotechnical Testing Journal, Vol. 33, No. 2, pp.103-111.
  120. Rowe, R.K, Rimal, S., Arnepalli, D.N. and Bathurst, R.J. 2010. Durability of fluorinated high density polyethylene geomembrane in the Arctic. Geotextiles and Geomembranes, Vol. 28, pp. 100-107.
  121. Huang, B., Bathurst, R.J. and Hatami, K. 2009. Numerical study of reinforced soil segmental walls using three different constitutive soil models. ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 135, No. 10, pp. 1486-1498.
  122. Huang, B. and Bathurst, R.J. 2009. Evaluation of soil-geogrid pullout models using a statistical approach. ASTM Geotechnical Testing Journal, Vol. 32, No. 6, pp. 489-504.
  123. Bathurst, R.J., Siemens, G. and Ho, F. 2009. Experimental investigation of infiltration ponding in one-dimensional sand-geotextile columns. Geosynthetics International, Vol. 16, No. 3, pp. 158-172.
  124. Zarnani, S. and Bathurst, R.J. 2009. Influence of constitutive model on numerical simulation of EPS seismic buffer shaking table tests. Geotextiles and Geomembranes, Vol. 27, No. 4, pp. 308-312.
  125. Miyata, Y. and Bathurst, R.J. 2009. Measured and predicted loads in multi-anchor reinforced soil walls in Japan. Soils and Foundations, Vol. 49, No.1, pp. 1-10.
  126. Zarnani, S. and Bathurst, R.J. 2009. Numerical parametric study of EPS geofoam seismic buffers. Canadian Geotechnical Journal, Vol. 46, No. 3, pp. 318-338.
  127. Bathurst, R.J., Nernheim, A., Walters, D.L., Allen, T.M., Burgess, P. and Saunders, D. 2009. Influence of reinforcement stiffness and compaction on the performance of four geosynthetic reinforced soil walls. Geosynthetics International, Vol. 16, No. 1, pp. 43-59.
  128. Bathurst, R.J., Nernheim, A. and Allen, T.M. 2009. Predicted loads in steel reinforced soil walls using the AASHTO Simplified Method. ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 135, No. 2, pp. 177-184.
  129. Miyata, Y. and Bathurst, R.J. 2008. Prediction model of reinforcement load for geogrid soil walls with facing batter. Geosynthetics Engineering Journal. Japan Chapter of IGS, Vol. 23, pp. 195-200 (in Japanese)
  130. Wang Y. and Bathurst, R.J. 2008. Horizontal slice method for force and displacement analysis of EPS geofoam seismic buffers for rigid retaining walls. China Civil Engineering Journal, Vol. 41, No. 10, pp. 73-80.
  131. Bathurst, R.J., Allen,T.M. and Nowak, A.S. 2008. Calibration concepts for load and resistance factor design (LRFD) of reinforced soil walls. Canadian Geotechnical Journal, Vol. 45, No. 10. pp. 1377-1392. Gzowski Medal of the Canadian Society for Civil Engineering
  132. Bathurst, R.J., Miyata, Y., Nernheim, A. and Allen, T.M. 2008. Refinement of K-stiffness method for geosynthetic reinforced soil walls. Geosynthetics International, Vol. 15, No. 4, pp. 269-295.
  133. Tatsuoka, F., Palmeira, E.M., Bathurst, R.J., Stevenson, P. and Zornberg, J.G. 2008. Advances ingeosynthetics materials and applications for reinforcement and environmental protection works. Invited paper. The Electronic Journal of Geotechnical Engineering (EJGE) (Special Volume)
  134. Zarnani, S. and Bathurst, R.J. 2008. Numerical modeling of EPS seismic buffer shaking table tests. Geotextiles and Geomembranes, Vol. 26, No. 5, pp. 371-383.
  135. Rowe, R.K., Mukunoki, T. and Bathurst, R.J. 2008. Hydraulic conductivity to Jet-A1 of GCLs after up to 100 freeze-thaw cycles. Geotechnique, Vol. 58, No. 6, pp. 503-511.
  136. Bathurst, R.J., Nernheim, A. and Allen, T.M. 2008. Comparison of measured and predicted loads using the Coherent Gravity Method for steel soil walls. Ground Improvement, Vol. 161, No. 3, pp. 113-120.
  137. Bathurst, R.J., Althoff, S. and Linnenbaum, P. 2008. Influence of test method on direct shearbehavior of segmental retaining wall units. ASTM Geotechnical Testing Journal, Vol. 31, No. 2, 9 p.
  138. Bathurst, R.J., Vlachopoulos, N., Walters, D.L., Burgess, P.G. and Allen, T.M. 2007. Reply to the discussions on "The influence of facing rigidity on the performance of two geosynthetic reinforced soil retaining walls", Canadian Geotechnical Journal, Vol. 44, No. 12, pp. 1484-1490.
  139. Miyata, Y. and Bathurst, R.J. 2007. Development of K-stiffness method for geosynthetic reinforced soil walls constructed with c-¢ soils. Canadian Geotechnical Journal, Vol. 44, No. 12, pp. 1391-1416.
  140. Bathurst, R.J., Ho, A.F. and Siemens, G. 2007. A column apparatus for investigation of 1-D unsaturated-saturated response of sand-geotextile systems. ASTM Geotechnical Testing Journal, Vol. 30, No. 6, pp. 433-441.
  141. Zarnani, S. and Bathurst, R.J. 2007. Experimental investigation of EPS geofoam seismic buffers using shaking table tests. Geosynthetics International, Vol. 14, No. 3, pp. 165-177.
  142. Krahn, T., Blatz, J., Alfaro, M. and Bathurst, R.J. 2007. Large-scale interface shear testing of sandbag dike materials. Geosynthetics International, Vol. 14, No. 2, pp. 119-126.
  143. Miyata, Y. and Bathurst, R.J. 2007. Evaluation of K-Stiffness method for vertical geosynthetic reinforced granular soil walls in Japan. Soils and Foundations, Vol. 47, No. 2, pp. 319-335.
  144. Rowe, R.K., Mukunoki, T., Bathurst, R.J., Rimal, S., Hurst, P. and Hansen, S. 2007. Performance of ageocomposite liner for containing Jet A-1 Spill in an Extreme Environment, (Special Issue onGeosynthetics in Harsh Environments). Geotextiles and Geomembranes, Vol 25. pp.68-77.
  145. El-Emam, M. and Bathurst, R.J. 2007. Influence of reinforcement parameters on the seismic response of reduced-scale reinforced soil retaining walls. Geotextiles and Geomembranes, Vol. 25, No. 1, pp. 33-49.
  146. Bathurst, R.J., Keshavarz, A., Zarnani, S. and Take, A. 2007. A simple displacement model for response analysis of EPS geofoam seismic buffers. Soil Dynamics and Earthquake Engineering, Vol. 27, pp. 344-353.
  147. Bathurst, R.J., Zarnani, S. and Gaskin, A. 2007. Shaking table testing of geofoam seismic buffers. Soil Dynamics and Earthquake Engineering, Vol. 27, pp. 324-332.
  148. Gao, W. and Bathurst, R.J. 2007. Numerical simulation of failure mechanism for reinforced and unreinforced slopes under strip footing. China Civil Engineering Journal, Vol. 40, No. 6, pp. 54-58 (in Chinese).
  149. Gao, W. and Bathurst, R.J. 2007. Stability analysis of reinforced slope loaded by a strip footing. Chinese Journal of Rock Mechanics and Engineering, Vol. 26, No. 2, pp. 374-380 (in Chinese).
  150. Bathurst, R.J.,Vlachopoulos, N., Walters, D.L., Burgess, P.G. and Allen, T.M. 2006. The influence of facing rigidity on the performance of two geosynthetic reinforced soil retaining walls. Canadian Geotechnical Journal, Vol. 43, No. 12, pp. 1225-1237.
  151. Rowe, R.K., Mukunoki, T., Bathurst, R.J. 2006. Compatibility with Jet A-1 of a GCL subjected to freeze-thaw cycles. ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 132, No, 12, pp. 1526-1537.
  152. Hatami, K. and Bathurst, R.J. 2006. Numerical model for reinforced soil segmental walls under surcharge loading. ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 132, No. 6, pp. 673-684.
  153. Bathurst, R.J., Rowe, R.K., Zeeb, B. and Reimer, K. 2006. A geocomposite barrier for hydrocarbon containment in the Arctic. International Journal of GeoEngineering Case Histories, Vol. 1, No.1., pp. 18-34.
  154. Miyata, Y. and Bathurst, R.J. 2006. Prediction model of soil reinforcement load for geogrid reinforced walls with cohesive soil backfills.Geosynthetics Engineering Journal, Japan chapter ofIGS, Vol. 21, pp. 223-229 (in Japanese)
  155. Hatami, K. and Bathurst, R.J. 2005. Development and verification of a numerical model for the analysis of geosynthetic reinforced soil segmental walls under working stress conditions. Canadian Geotechnical Journal, Vol. 42, No. 4, pp. 1066-1085. Gzowski Medal of the Canadian Society for Civil Engineering
  156. El-Emam, M. and Bathurst, R.J. 2005. Facing contribution to seismic response of reduced-scale reinforced soil walls. Geosynthetics International, Vol. 12, No. 5, pp. 215-238.
  157. Bathurst, R.J., Allen. T.M. and Walters, D.L. 2005. Reinforcement loads in geosynthetic walls and the case for a new working stress design method. Geotextiles and Geomembranes, Vol. 23, No. 4, pp. 287-322.
  158. Tao, L.J. and Bathurst, R.J. 2005. Footing load prediction of geogrid reinforced slope by numerical method. Chinese Journal of Civil Engineering, Vol. 38, No. 7, pp. 107-111 (in Chinese).
  159. El-Emam, M. and Bathurst, R.J. 2004. Experimental design, instrumentation and interpretation of reinforced soil wall response using a shaking table. International Journal of Physical Modelling in Geotechnics, Vol. 4, No. 4, pp. 13-32.
  160. Shinoda, M., Bathurst, R.J. and Yonezawa, T. 2004. Reliability analysis of reinforced soil retaining walls based on North American design codes. Japan Chapter of IGS, Vol. 19, pp. 7-14 (in Japanese)
  161. Shinoda, M. and Bathurst, R.J. 2004. Strain measurement of geogrids using a video-extensometer technique. ASTM Geotechnical Testing Journal, Vol. 27. No. 5, 8 p.
  162. Allen, T.M., Bathurst, R.J., Holtz, R.D., Lee, W.F. and Walters, D.L. 2004. A new working stress method for prediction of loads in steel reinforced soil walls. ASCE Journal of Geotechnical and Geoenvironmental Engineering. Vol. 130, No. 11, pp. 1109-1120.
  163. Bathurst, R.J. and Tao, L.J. 2004. Study on ultimate bearing capacity of reinforced slopes with full-scale model test. Chinese Journal of Geotechnical Engineering Journal, Vol. 26, No. 2, pp. 194-197 (in Chinese)
  164. Shinoda, M. and Bathurst, R.J. 2004. Lateral and axial deformation of PP, HDPE and PET geogrids under tensile load. Geotextiles and Geomembranes, Vol. 22, pp. 205-222.
  165. Rowe, R.K., Li, H.M., Bathurst. R.J. and Mukunoki, T. 2004. Effect of freeze-thaw on the permeation of arctic diesel through a GCL. Journal of ASTM International, Vol. 1, No. 2 pp. 1-13.
  166. Rowe, R.K., Mukunoki, T., Li, H.M. and Bathurst, R.J. 2004. Effect of freeze-thaw on the permeation of arctic diesel through a GCL. Advances in Geosynthetic Clay Liner Technology: 2nd SymposiumSTP 1456, R. E. Mackey and K. VonMaubeuge, Eds., American Society for Testing and Materials, West Conshohocken, PA
  167. Allen, T.M., Bathurst, R.J., Walters, D.L., Holtz, R.D. and Lee, W.F. 2003. A new working stress method for prediction of reinforcement loads in geosynthetic walls. Canadian Geotechnical Journal, 40(5), 976-994. Honourable Mention for Gzowski Medal of the Canadian Society for Civil Engineering. Honourable Mention for R.M. QUIGLEY AWARD of the Canadian Geotechnical Society
  168. Bathurst, R.J., Blatz, J.A. and Burger, M.H. 2003. Performance of full-scale reinforced embankments loaded to failure. Canadian Geotechnical Journal, 40(6), 1067-1083.
  169. Blatz, J.A. and Bathurst, R.J. 2003. Limit equilibrium analysis of reinforced and unreinforced full-scale embankments loaded to failure. Canadian Geotechnical Journal, 40(6), 1084-1092.
  170. Allen, T.M., Bathurst, R.J. and Berg, R.R. 2002. Global level of safety and performance of geosynthetic walls: An historical perspective. Geosynthetics International, 9(5-6), 395-450.
  171. Bathurst, R.J., Allen, T.M. and Walters, D.L. 2002. Short-term strain and deformation behavior of geosynthetic walls at working stress conditions. Geosynthetics International, 9(5-6), 451-482.
  172. Walters, D.L., Allen, T.M. and Bathurst, R.J. 2002. Conversion of geosynthetic strain to load using reinforcement stiffness. Geosynthetics International, 9(5-6), 483-523.
  173. Allen, T.M. and Bathurst, R.J. 2002. Soil reinforcement loads in geosynthetic walls at working stress conditions. Geosynthetics International, 9(5-6), 525-566.
  174. Allen, T.M. and Bathurst, R.J. 2002. Observed long-term performance of geosynthetic walls, and implications for design. Geosynthetics International, 9(5-6), 567-606.
  175. Shinoda, M., Bathurst, R.J., Tatsuoka, F. and Horii, K. 2002. Time-dependent deformation and strength characteristics of geogrids due to viscous properties. Japan Chapter of IGS, Vol. 17, pp. 137-144 (in Japanese)
  176. Hatami, K., Bathurst, R.J. and Di Pietro, P. 2001. Static response of reinforced soil retaining walls with non-uniform reinforcement. International Journal of Geomechanics, 1(4), 477-506, 2001
  177. Hatami, K. and Bathurst, R.J. 2000. Effect of structural design on fundamental frequency of reinforced-soil retaining walls. Soil Dynamics and Earthquake Engineering, Vol. 19, pp. 137-157, 2000
  178. Raymond, G.P. and Bathurst, R.J. 2000. Facilitating cold climate pavement drainage using geosynthetics, testing and performance of geosynthetics in subsurface drainage. STP 1390, L.D. Suits, J.B. Goddard, and J.S. Baldwin Eds., ASTM, West Conshohocken, PA, pp. 52-63, 2000
  179. Raymond, G.P., Bathurst, R.J. and Hajek, J. 2000. Evaluation and suggested improvements to highway edge drains incorporating geotextiles. Geotextiles and Geomembranes, Vol. 18, No. 1, pp. 23-46, 2000
  180. Bathurst, R.J. and Knight, M.A. 1998. Analysis of geocell reinforced-soil covers over large span conduits. Computers and Geotechnics, Vol. 22, Nos. 3-4, pp. 205-219, 1998.
  181. Bathurst, R.J. and Hatami, K. 1998. Seismic response analysis of a geosynthetic reinforced soil retaining wall. Geosynthetics International, Vol. 5, Nos. 1-2, pp. 127-166, 1998
  182. Simac, M.R., Bathurst, R.J. and Fennessey, T.W. 1997. Case study of a hybrid gabion basket geosynthetic reinforced soil wall. Ground Improvement, Vol. 1, No. 1, pp. 9-17, 1997
  183. Cai. Z. and Bathurst, R.J. 1996. Seismic-induced permanent displacement of geosynthetic reinforced segmental retaining walls. Canadian Geotechnical Journal, Vol. 33, pp. 937-955, 1996
  184. Allen, T.M. and Bathurst, R.J. 1996. Investigation of the combined allowable strength reduction factor for geosynthetic creep and installation damage. Geosynthetics International, Vol. 3, No. 3, pp. 407-439, 1996
  185. Cai, Z. and Bathurst, R.J. 1996. Deterministic sliding block methods for estimating seismic displacements of earth structures. Soil Dynamics and Earthquake Engineering, Vol. 15, No, 4, pp. 255-268, 1996
  186. Berlin, A.A., Rothenburg, L. and Bathurst, R.J. 1996. Computer simulation of assemblies of rigid elastic elliptical particles. Polymer Plastics Technology and Engineering, Vol. 35, No. 4, pp. 605-648, 1996
  187. Raymond, G.P., Bathurst, R.J. and Hajek, J. 1996. Evaluation of Pre-1994 Ontario highway edge drain practice, recent developments in geotextile filters and prefabricated drainage geocomposites. ASTM Special Technical Publication 1281, (Bhatia and Suits, Eds.), American Society for Testing and Materials, Philadelphia, PA 1996, 20 June 1995, Denver Colorado, pp. 222-233.
  188. Giroud, J.P., Pelte, T. and Bathurst, R.J. 1995. Uplift of geomembranes by wind. Geosynthetics International, Vol. 2, No. 6, pp. 897-952, 1995
  189. Cai, Z. and Bathurst, R.J. 1995. Seismic response analysis of geosynthetic reinforced soil segmental retaining walls by finite element method. Computers and Geotechnics, Vol. 17 No. 4, pp. 523-546, 1995
  190. Bathurst, R.J. and Cai, Z. 1995. Pseudo-static seismic analysis of geosynthetic reinforced segmental retaining walls. Geosynthetics International,Vol . 2, No. 5, pp. 789-832, 1995
  191. Karpurapu, R.G. and Bathurst, R.J. 1995. Behaviour of geosynthetic reinforced soil retaining walls using the finite element method. Computers and Geotechnics, (invited paper), Vol. 17, No. 3, pp. 279-299, 1995
  192. Cai, Z., Raymond, G.P. and Bathurst, R.J. 1994. Estimate of static track modulus using elastic foundation models. Transportation Research Record, 1470, pp. 65-83, 1994.
  193. Cai, Z., Raymond, G.P. and Bathurst, R.J. 1994. Natural vibration analysis of rail track as a system of elastically coupled beam structures on Winkler foundation. Computers and Structures, Vol. 53, No. 6, pp. 1427-1436, 1994
  194. Allen, T.M. and Bathurst, R.J. 1994. Characterization of geosynthetic load-strain behavior after installation damage. Geosynthetics International, Vol. 1, No.2, pp. 181-199, 1994
  195. Raymond, G.P. and Bathurst, R.J. 1994. Repeated-load response of aggregates in relation to track quality index. Canadian Geotechnical Journal, Vol 31, No.4, pp. 547-554, 1994
  196. Bathurst, R.J. and Cai, Z. 1994. In-isolation cyclic load-extension behavior of two geogrids. Geosynthetics International, Vol. 1, No.1, pp. 3-17, 1994
  197. Bathurst, R.J. and Simac, M.R. 1993. Laboratory testing of modular unit-geogrid facing connections. STP 1190 Geosynthetic Soil Reinforcement Testing Procedures ( S.C.J. Cheng editor ), American Society for Testing and Materials (Special Technical Publication), pp. 32-48, 1993
  198. Bathurst, R.J. and Karpurapu, R. 1993. Large scale triaxial compression testing of geocell reinforced granular soils. ASTM Geotechnical Testing Journal, Vol. 16, No. 3, pp.296-303, September 1993
  199. Bathurst, R.J. and Simac, M.R. 1993. Two computer programs for the design and analysis of geosynthetic-reinforced soil retaining walls. Geotextiles and Geomembranes, Vol. 12, No. 5, pp. 381-396, 1993
  200. Bathurst, R.J., Simac, M.R. and Berg, R.R. 1993. Review of the NCMA Segmental Retaining Wall Design Manual for geosynthetic-reinforced structures. Transportation Research Record, 1414, pp. 16-25, 1993
  201. Rothenburg, L. and Bathurst, R.J. 1993. Influence of particle eccentricity on micromechanical behavior of granular materials. Mechanics of Materials Vol 16 pp. 141-152, 1993
  202. Berlin, A.A., Rothenburg, L. and Bathurst, R.J. 1993. Liquid-glass transition in systems of interacting rigid particle systems. Polymer Science, Vol. 35, No. 7, pp. 952-956, 1993.
  203. Berlin, A.A., Rothenburg, L. and Bathurst, R.J. 1993. Rotation flow mechanism of dense liquid systems of smooth elliptical particles in plane. Polymer Science, Vol. 35, No. 7, pp. 957-966, 1993.
  204. Karpurapu, R. and Bathurst, R.J. 1993. Development of a finite element analysis post-processing program. Advanced Engineering Software, Vol. 16, No.1, pp.15-22, 1993
  205. Hajek, J.J., Kazmierowski, T.J., Sturm, H., Bathurst, R.J. and Raymond, G.P. 1992. Field performance of open-graded drainage layers. Transportation Research Record, 1354, pp.55-64, 1992
  206. Berlin, A.A., Rothenburg, L. and Bathurst, R.J. 1992 . Peculiarities of deformation of disordered polymeric andnonpolymeric bodies. Polymer Science, Vol.34, No.7, 559-573 1992
  207. Yogendrakumar, M. and Bathurst, R.J. 1992. Numerical simulation of reinforced soil structures during blast loadings. Transportation Research Record, 1336, pp.1-8, 1992
  208. Yogendrakumar, M., Bathurst, R.J. and Finn, W.D.L. 1992. Dynamic response analysis of a reinforced soil retaining wall. ASCE Journal of Geotechnical Engineering, Vol. 118, No. 8, pp 1158-1167, August 1992
  209. Bathurst, R.J. and Rothenburg, L. 1992. Investigation of micromechanical features of idealized granular assemblies using the discrete element method. Engineering Computations 9, 199-210, 1992
  210. Rothenburg, L. and Bathurst, R.J. 1992. Micromechanical features of granular assemblies with plane elliptical particles. Geotechnique 42 No.1, 79-95, 1992
  211. Bathurst, R.J., Karpurapu, R.G. and Jarrett, P.M. 1992. Finite element analysis of a geogrid reinforced soil wall. ASCE Geotechnical Special Publication No. 30: Grouting, Soil Improvement and Geosynthetics (Borden, Holtz, Juran editors) Vol. 2, pp. 1213-1224, 1992
  212. Raymond, G.P., Abdel-Baki, M.S.A., Karpurapu, R.G. and Bathurst, R.J. 1992. Improvement from reinforcement of granular soil below eccentrically loaded footings. ASCE Geotechnical Special Publication No. 30: Grouting, Soil Improvement and Geosynthetics (Borden, Holtz, Juran editors) Vol. 2, pp. 1104-1115, 1992
  213. Karpurapu, R.G. and Bathurst, R.J. 1992. Numerical investigation of controlled yielding of soil retaining wall structures. Geotextiles and Geomembranes, Vol 11, No.2, pp 115-131, 1992
  214. Rothenburg, L. and Bathurst, R.J. 1991. Numerical simulation of idealized granular assemblies with plane elliptical particles. Computers and Geotechnics, Vol. 11, pp. 315-329, 1991
  215. Rothenburg, L., Berlin, A.A. and Bathurst, R.J. 1991. Materials with negative Poisson's ratio. Nature. Vol 354, pp. 470-472, 12 December 1991
  216. Berlin, A.A., Rothenburg, L. and Bathurst, R.J. 1991. Deformation behavior of granular systems and glass fluid transition. Chemical Physics, USSR Academy of Sciences, Vol 10, No.9, 1284-1291, 1991
  217. Berlin, A.A., Rothenburg, L. and Bathurst, R.J. 1991. Structures of isotropic materials with negative Poisson's ratio. Macromolecular Compounds, USSR Academy of Sciences, Vol 32, No. 8, 619-621, 1991 (in Russian)
  218. Bathurst, R.J. and Benjamin, D.J. 1990. Failure of a geogrid-reinforced soil wall. Transportation Research Record 1288, pp. 109-116. 1990
  219. Rothenburg, L. and Bathurst, R.J. 1990. Discussion: Analytical study of induced anisotropy in idealized granular materials. Geotechnique 49, No. 4, pp. 665-667, 1990
  220. Bathurst, R.J. and Rothenburg, L. 1990. Observations on stress-force-fabric relationships in idealized granular materials. Mechanics of Materials 9, pp. 65-80. 1990
  221. Bathurst, R.J. and Raymond, G.P. 1990. Dynamic response of open-graded highway aggregates. Transportation Research Record 1278, pp. 35-42, 1990
  222. Bathurst, R.J. 1990. Instrumentation of geogrid-reinforced soil walls. Transportation Research Record 1277, pp. 102-111, 1990
  223. Rothenburg, L. and Bathurst, R.J. 1989. Analytical study of induced anisotropy in idealized granular materials. Geotechnique 39, No. 4, pp. 601-614, 1989
  224. Bathurst, R.J. and Jarrett, P.M. 1988. Large-scale model tests ofgeocomposite mattresses over peat subgrades. Transportation Research Record 1188, pp. 28-36, 1988
  225. Bathurst, R.J. and Rothenburg, L. 1988. Note on a random isotropic granular material with negative Poisson's ratio. Int. Jour. Engr. Science, Vol. 26, No. 4, pp. 373-383, 1988
  226. Bathurst, R.J. and Rothenburg, L. 1988. Micromechanical aspects of isotropic granular materials with linear contact interactions. Jour. Applied Mechanics, Vol. 55, pp. 17-23, March 1988
  227. Bathurst, R.J., Benjamin, D.J. and Jarrett, P.M. 1988. Laboratory study of geogrid reinforced soils walls. ASCE Special Publication No. 18 (Geosynthetics for Soil Improvement), pp. 178-192, May 1988.
  228. Karpurapu, R.G. and Bathurst, R.J. 1988. Comparative analysis of some geomechanics problems using finite and infinite element methods. Computers and Geotechnics, Vol. 5, pp. 269-284, 1988
  229. Raymond, G.P. and Bathurst, R.J. 1987. Performance of large-scale model single tie-ballast systems. Transportation Research Record 1131, pp. 7-14, 1987
  230. Bathurst, R.J. and Raymond, G.P. 1987. Geogrid reinforcement of ballasted track. Transportation Research Record 1153, pp. 8-14, 1987

PhD Thesis

BOOKS and BOOK CONTRIBUTIONS

  1. Bathurst, R.J., and Miyata, Y. 2024. Mechanically stabilized earth (MSE) walls. Chapter 14. In Data-centric geotechnics. Geotechnical structures (2). Edited by K.K. Phoon and C. Tang. Taylor & Francis Group, LLC. (in press)
  2. Bathurst, R.J. 2023. Chapter 24 Geosynthetics: 5th Edition Canadian Foundation Engineering Manual, 2023.
  3. Bathurst, R.J. 2023. Chapter 21 Reinforced Soil Walls (MSE walls): 5th Edition Canadian Foundation Engineering Manual, 2023.
  4. Bathurst, R.J., Hatami, K. and Alfaro, M.C. 2021. Geosynthetic-reinforced soil walls and slopes - seismic aspects, Chapter 19, Handbook of Geosynthetic Engineering, Third edition, Editor: S.K. Shukla, ICE Publishing, London, UK, 371-415.
  5. Miyata, Y., Bathurst, R.J. and Takano, D. 2021. Ports, waterways and coastal structures. Chapter 17, Handbook of Geosynthetic Engineering, Third edition, Editor: S.K. Shukla, ICE Publishing, London, UK, 343-351.
  6. Tang, C. and Bathurst, R. 2021. Chapter 4. Statistics for geotechnical design model factors. In  Ching, J., & Schweckendiek, T. (Eds.) (2021). State-of-the-art review of inherent variability and uncertainty in geotechnical properties and models. ISSMGE Technical Committee 304. (http://140.112.12.21/issmge/2021/SOA_Review_on_geotechnical_property_variablity_and_model_uncertainty.pdf)
  7. Bathurst R.J. 2020. Developments in MSE Wall Research and Design. In: Tatsouka F., Guler E., Shehata H., Giroud J. (eds) Innovative Infrastructure Solutions using Geosynthetics. GeoMEast 2019. Sustainable Civil Infrastructures. Springer, Cham. pp. 22-50. (http://dx.doi.org/10.1007/978-3-030-34242-5_3)
  8. Van Dyk, A., Bathurst, R.J., Maher, M. and Boone, S. 2017. Design, Construction, Maintenance and Inspection Guide for Mechanically Stabilized Earth Walls, Transportation Association of Canada, Ottawa, ON, Canada. 136 p.
  9. Bathurst, R.J. 2014. Chapter 8: LRFD calibration of simple limit state functions in geotechnical soil-structure design. Reliability-Based Design in Geotechnical Engineering: Computations and Applications (K.K. Phoon & J. Ching editors), Spon Press, pp. 339-354.
  10. Bathurst, R.J. 2014. Chapter 113: Design of Mechanically Stabilized Walls (MSWs), Encyclopedia of Earthquake Engineering, (eds M. Beer, E. Patelli, I. Kougioumtzoglou, I. S-K. Au). Springer (online). (DOI 10.1007/978-3-642-36197-5_113-1)
  11. Bathurst, R.J., Allen, T.M., Miyata, Y. and Huang, B. 2013. Lessons learned from LRFD calibration of reinforced soil wall structures. Modern Design Codes of Practice - Development, Calibration, and Experiences. (eds P. Arnold, M. Hicks, T. Schweckendiek, B. Simpson & G. Fenton). IOS Press. Amsterdam,The Netherlands, pp. 261-276.
  12. Bathurst, R.J., Hatami, K. and Alfaro, M.C. 2012. Geosynthetic-reinforced soil walls and slopes - seismic aspects, Chapter 16, Handbook of Geosynthetic Engineering, Second edition, Editor: S.K. Shukla, ICE Publishing, London, UK, 317-363.
  13. Bathurst, R.J., Huang, B. and Hatami, K. 2009. Numerical modeling of geosynthetic reinforced soil walls. Chapter 4 in Linear and Non Linear Numerical Analysis of Foundations, (J. Bull Editor), Taylor & Francis, New York, NY, 131-157.
  14. Bathurst, R.J. and Palmeira, E. 2008. Editors of CD Proceedings of the First Pan American Geosynthetics Conference & Exhibition, 2-5 March 2008, Cancun, Mexico (eds Bathurst & Palmeira), IFAI.
  15. Allen, T.M., Nowak, A.S. and Bathurst, R.J. 2005. Calibration to Determine Load and Resistance Factors for Geotechnical and Structural Design, Transportation Research Board Circular E-C079, Washington, DC, 93 p.
  16. Kaliakin, V.N. and Bathurst, R.J. Review and Assessment of Numerical Models to Simulate Relaxation of Geosynthetics, in Geosynthetics and Geosynthetic-Engineered Soil Structures, Contributions from the Symposium Honoring Prof. Robert M. Koerner, (eds. H.L. Ling, V.N. Kaliakin, D. Leshchinsky), ASCE Engineering Mechanics Division, pp. 203-249.
  17. Hatami, K., Bathurst, R.J. and El-Emam, M. Validation of Numerical Models for Static and Seismic Analysis of Reinforced Soil Walls, in Geosynthetics and Geosynthetic-Engineered Soil Structures, Contributions from the Symposium Honoring Prof. Robert M. Koerner, (eds. H.L. Ling, V.N. Kaliakin, D. Leshchinsky), ASCE Engineering Mechanics Division, pp. 171-202.
  18. Chapter 29 Geosynthetics: 4th Edition Canadian Foundation Engineering Manual, 2005, 53 p.
  19. Bathurst, R.J., Hatami, K. and Alfaro, M.C. 2002, Geosynthetic Reinforced Soil Walls and Slopes: Seismic Aspects, (S.K. Shukla Ed.):Geosynthetics and Their Applications, Thomas Telford Ltd., London, UK, pp. 327-392.
  20. Bathurst, R.J., Hatami, K., Walters, D.L., Taleb, B. and Simac, M.R, Geosynthetic Reinforced Soil Segmental Retaining Walls: A New Technology, Jubilee Volume, 75th Anniversary of K. Terzaghi's Erdbaumechanik (Soil Mechanics), (2000/2001) Vienna Technical University, Vienna, Austria, Volume 5, pp. 175-204.
  21. Bathurst, R.J. and Jones, C.J.F.P., Chapter 17: Earth Retaining Structures and Reinforced Slopes, Geotechnical and Geoenvironmental Engineering Handbook, (2001) Kluwer Academic Publishing, Norwell, MA, U.S.A. (R.K. Rowe, Editor) 1088 p.
  22. Bathurst, R.J., NCMA Segmental Retaining Wall Seismic Design Procedure -Supplement to Design Manual for Segmental Retaining Walls (Second Edition 1997) published by the National Concrete Masonry Association, Herdon, VA, 87p.
  23. Bathurst, R.J., Simac, M.R., Christopher, B.R., and Bonczkiewicz, C., A Database of Results from a Geosynthetic Reinforced Modular Block Soil Retaining Wall, Proceedings of Soil Reinforcement: Full Scale Experiments of the 80's, ISSMFE/ENPC, Paris, France, 18-19 November 1993, pp. 341-365 (invited contribution)
  24. Bathurst, R.J., Jarrett, P.M. and Benjamin, D.J.R.S., A Database of Results from an Incrementally Constructed Geogrid-reinforced Soil Wall Test, Proceedings of Soil Reinforcement: Full Scale Experiments of the 80's, ISSMFE/ENPC, Paris, France, 18-19 November 1993, pp.401-430 (invited contribution)
  25. Simac, M.R., Bathurst, R.J., Berg, R.R. and Lothspeich, S.E., 1993. National Concrete Masonry Association Segmental Retaining Wall Design Manual, Earth Improvement Technologies, pp. 250, March 1993
  26. Chapter 30 Geosynthetics: 3rd Edition Canadian Foundation Engineering Manual (pp. 39) (Chapter edited by R.J.Bathurst and G.P.Raymond) 1993
  27. Bathurst, R.J., Crowe, E. and Zehaluk, A.C., Geocell Cellular Confinement Retaining Wall: Town of Richmond Hill, Geosynthetics Case Histories, 35 Years of Experience, (Special publication Technical Committee No. 9 International Society for Soil Mechanics and Foundation Engineering), pp. 266-267, 1993
  28. Rothenburg, L. and Bathurst, R.J. Effects of Particle Shape on Micromechanical Behavior of Granular Materials, Studies in Applied Mechanics 31: Advances in Micromechanics of Granular Materials, Elsevier Science Publishers B.V., Amsterdam, Netherlands, (editors Shen, Satake, Mehrabadi, Chang and Campbell) pp. 343-352, 1992 (invited contribution)
  29. Bathurst, R.J., Wawrychuk, W.F. and Jarrett, P.M., Laboratory Investigation of Two Large-Scale Geogrid Reinforced Soils Walls, The Application of Polymeric Reinforcement in Soil Retaining Structures, NATO Advanced Study Institutes Series, Kluwer Academic Publishers, pp. 75-125, 1987.
  30. Bathurst, R.J. and Koerner, R.M., Results of Class A Predictions for the RMC Reinforced Soil Wall Trials, The Application of Polymeric Reinforcement in Soil Retaining Structures, NATO Advanced Study Institutes Series, Kluwer Academic Publishers, pp.127-172, 1987.
  31. Bathurst, R.J. and Benjamin, D.J., Preliminary Assessment of Sidewall Friction on Large-Scale Wall Models in the RMC Test Facility, The Application of Polymeric Reinforcement in Soil Retaining Structures, NATO Advanced Study Institutes Series, Kluwer Academic Publishers, pp. 181-192, 1987.

CONFERENCE and SYMPOSIUM PROCEEDINGS (PEER REVIEWED PAPERS ONLY)

  1. Bathurst, R.J. and Naftchali, F.M. 2024. Numerical modelling of the reinforced fill over a void problem considering rate-dependent geosynthetic stiffness. GeoMontreal 2024, Montreal, 8p. 
  2. Moncada, A., Damians, I.P., Malekmohammadi, K., Olivella, S., Bathurst, R.J. 2024. Life cycle assessment of geosynthetic reinforced soil structures: Software comparison. GeoMontreal 2024, Montreal, 6p.
  3. Jamshidi Chenari, R. and Bathurst, R.J. 2024. Stochastic analysis of reinforced structures with anisotropic random soil properties. Applied Numerical Modeling in Geomechanics – 2024 – Hazzard, Katsaga, Sanftenberg & Nelson (eds.). Proceedings of 6th International ITASCA Symposium, Toronto, June 2024.
  4. Bathurst, R.J. and Naftchali, F.M. 2024. A probabilistic design approach to the reinforced fill over a void problem. GeoAmericas 2024, Toronto, 9p.
  5. Bathurst, R.J. and Jamshidi Chenari, R. 2024. Bearing capacity of strip footings seated on unreinforced and reinforced granular layers over random homogeneous and isotropic spatially variable undrained soft clay. GeoAmericas 2024, Toronto, 11p. 
  6. Moncada, A., Damians, I.P., Olivella, S. and Bathurst, R.J. 2024. Study of environmental impact from geosynthetic reinforced soil walls. GeoAmericas 2024, Toronto, 8p.
  7. Bathurst, R.J. and Jamshidi Chenari, R. 2024. Design of geosynthetic MSE walls supporting bridge abutment footings using the stiffness method. Geo-Congress 2024, GSP 350, pages 296-304.
  8. Bathurst, R.J. 2023.The case for true probabilistic internal stability design of geosynthetic MSE walls.  GeoSaskatoon, Saskatoon, 1-4 October 7p.
  9. Naftchali, F.M. and Bathurst, R.J. 2023. Solutions for the reinforced fill over a void problem considering a new geosynthetic stiffness limit state. GeoSaskatoon, Saskatoon, 1-4 October 6p.
  10. Moncada, A., Olivella, S., Damians, I.P. and Bathurst, R.J. 2023. Comparison of geosynthetic reinforced soil wall solutions using analytical design methods and numerical modelling. GeoSaskatoon, Saskatoon, 1-4 October 8p.
  11. Bathurst, R.J. and Naftchali, F.M. 2023. A practical isochronous stiffness model for analysis and design of reinforced soil structures. Proceedings of the 12th International Conference on Geosynthetics (12th ICG Rome), Rome, 17-21 September 2023 pages 566-572.
  12. Bathurst, R.J. 2023. Migrating to probabilistic internal stability analysis and design of reinforced soil walls. Proceedings of the 12th International Conference on Geosynthetics (12th ICG Rome), Rome, 17-21 September 2023 pages 1860-1865.
  13. Naftchali, F.M. and Bathurst, R.J. 2023.  Revisiting the reinforced fill over a void problem considering geosynthetics reinforcement stiffness. Proceedings of the 12th International Conference on Geosynthetics (12th ICG Rome), Rome, 17-21 September 2023 pages 1115-1120.
  14. Moncada, A., Damians, I.P., Olivella, S., and Bathurst, R.J. 2023. Short-term thermo-mechanical numerical modelling of reinforced soil walls with polyester strap reinforcements. Proceedings of the 12th International Conference on Geosynthetics (12th ICG Rome), Rome, 17-21 September 2023 pages 966-971..
  15. Pinada, A., Moncada, A., Damians, I.P., Olivella, S., and Bathurst, R.J. 2023. Simplified approach to analyse global stability of reinforced soil walls. Proceedings of the 12th International Conference on Geosynthetics (12th ICG Rome), Rome, 17-21 September 2023 pages 1796-1801.
  16. Damians, I.P., Rimoldi, P., Miyata, Y., Detert, O., Uelzmann, S., Hoelzel, M., Kirchner, A., Bathurst, R.J., Naftchali, F.M., Cengiz, C., Zornberg, J.G., and Morsy, A.M. 2023. Summary of the Soil Reinforcement Technical Committee Special Session (IGS TC-R). 4th African Regional Conference on Geosynthetics, Cairo, Egypt, 20-23 February 2023.
  17. Bathurst, R.J. and Jamshidi Chenari, R. 2023. Bearing capacity of strip footings seated on granular layers over spatially variable undrained soft clay. Geo-Risk, Arlington, Virginia, US, July 2023.
  18. Bathurst, R.J. and Allen, T.M. 2023. Migrating from the Simplified Method to the Stiffness Method for Internal Stability Design of MSE walls. Geosynthetics 2023, Kansas City, MI, USA, Published by Advanced Textiles Association,  pages 621-633 (https://geosyntheticsconference.com/proceedings-archive/)
  19. Moncada, A., Damians, I.P., Olivella, S., and Bathurst, R.J. 2022. Influence of numerical model mesh properties on predicted in-soil temperature, relative humidity and degree of saturation of reinforced soil structures. Proceedings of the 2022 GeoAsia7 Conference & IGS First Young Engineers Conference (2022 GeoAsia7), Taipei, 31st October – 4th November, 2022.
  20. Bathurst, R.J. 2022.  Reliability assessment for internal stability design of MSE walls. Procediings of XVI International Conference on Computer Methods and Advances in Geomechanics, Torino, Italy, September 2022. Springer. M. Barla et al. (Eds.): IACMAG 2022, LNCE 288, pp. 275–282. (https://doi.org/10.1007/978-3-031-12851-6_33).
  21. Shafiee, N. and Bathurst, R.J. 2022. Reliability bearing capacity analysis of footings seated on unreinforced and reinforced granular layers over undrained cohesive soil with spatial variability. GeoCalgary, Calgary, Alberta October 2022.
  22. Brouthen, A., Damians, I.P., Bathurst, R.J., and Houhou, M.N. 2022. FE analysis of the effect of soil-reinforcement interaction and reinforcement pre-tensioning on the behaviour of back-to-back polymeric strip reinforced soil walls. 7th European Geosynthetics Conference (EuroGeo7). Warsaw, Poland, 4-7 September 2022.
  23. Bathurst, R.J. 2022. Lessons learned from LRFD calibration of reinforced soil wall limit states. Proceedings of the 20th International Conference on Soil Mechanics and Geotechical Engineering, Internaional Society of Soil Mechanics and Geotechnical Engineering (ISSMGE). Sydney, Australia. 6 p. 
  24. Damians, I.P., Lloret, A., Josa, A., and Bathurst, R.J.; 2022. Evaluación de la sostenibilidad de estructuras de contención de tierras: sensibilidad en las funciones de valor y en la ponderación de escenarios de toma de decisión. XI Simposio Nacional de Ingeniería Geotécnica - La Geotecnia en apoyo de la seguridad y la sostenibilidad. Escuela Politécnica de Mieres, Universidad de Oviedo, Principado de Asturias, 24-27 de mayo de 2022.
  25. Moncada, A.A., Olivella, S., Damians, I.P., and Bathurst, R.J. 2022. Modelización del comportamiento de bandas poliméricas de refuerzo en suelos bajo el efecto de la temperatura y humedad. XI Simposio Nacional de Ingeniería Geotécnica - La Geotecnia en apoyo de la seguridad y la sostenibilidad. Escuela Politécnica de Mieres, Universidad de Oviedo, Principado de Asturias, 24-27 de mayo de 2022.
  26. Moncada, A.A., Damians, I.P., Olivella, S., and Bathurst, R.J. 2022. Modelling the effect of in-soil temperature and relative humidity on performance of PET strap soil reinforcement products. Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering (20th ICSMGE), Sydney, 1–5 May 2022.
  27. Bathurst, R.J. and Naftchali, F.M. 2021. Selecting geosynthetic reinforcement stiffness for analysis and design of reinforced soil structures. 74th Canadian Geotechnical Conference, Niagara Fall, Ontario, 8 pages.
  28. Naftchali, F.M. and Bathurst, R.J. 2021. Deterministic and probabilistic analysis for the reinforced void problem considering geosynthetic reinforcement strength and stiffness. 74th Canadian Geotechnical Conference, Niagara Fall, Ontario, 8 pages.
  29. Bathurst, R.J., Miyata,Y. and Allen,T.M. 2020. Developments in analysis and design of PET strap MSE walls. 4th Pan American Conference on Geosynthetics, Rio de Janeiro, Brazil,  26-29 April 2020, 10 p.
  30. Bathurst, R.J. 2020. A simple probabilistic approach for internal stability analysis and design of geosynthetic reinforced soil walls. 4th Pan American Conference on Geosynthetics, Rio de Janeiro, Brazil,  26-29 April 2020, 10 p.
  31. Damians, I.P., Bathurst, R.J., Lloret, A., Josa, A. and El Mansouri, D. 2019. Assessment of Earth Retaining Wall Sustainability: Value Functions and Stakeholder Weighting Sensitivity. International Congress and Exhibition" Sustainable Civil Infrastructures”. pp. 73-88
  32. Bathurst, R.J., Allen, T.M. and Bozorgzadeh, N. 2019. Developments in LRFD calibration for internal limit states for mechanically stabilized earth walls in North America. Proceedings of the 7th International Symposium on Geotechnical Safety and Risk (ISGSR). Taipei, Taiwan. pp. 132-137.
  33. Bathurst, R.J. and Bozorgzadeh, N. 2019. A simple approach for probabilistic internal stability analysis and design of reinforced soil walls. 72nd Canadian Geotechnical Conference, St. Johns, Newfoundland,  7 p.
  34. Bathurst, R.J. 2019. A simple and rigorous approach for probabilistic internal stability analysis and design of reinforced soil walls. Geo-Congress 2019 GSP 306. pp.203-211.
  35. Javankhoshdel, S., Cami, B., Yacoub, T. and Bathurst, R.J. 2019. Probabilistic analysis of a MSE wall considering spatial variability of soil properties. Geo-Congress 2019 GSP 310. pp. 184-192.
  36. Takano, D., Morikawa, Y.,Miyata, Y., H. Nonoyama, H. and Bathurst, R.J. 2018. Physical modelling of compaction grouting injection using a transparent soil. In proceedings of 9th International Conference on Physical Modelling in Geotechnics 2018, London UK, – McNamara et al. (Eds). Taylor & Francis Group, London, ISBN 978-1-138-34422-8. pp. 1259-1263.
  37. Cami, B., Javankhoshdel, S., Yacoub, T. and Bathurst, R.J. 2018. 2D Spatial Variability Analysis of Sugar Creek Embankment: Comparative Study. Proceedings of the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 – The Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE). 9 p.
  38. Javankhoshdel, S., Cami, B., Mafi, M., Yacoub, T. and Bathurst, R.J. 2018. Optimization techniques in non-circular probabilistic slope stability analysis considering spatial variability. 71st Canadian Geotechnical Conference, Edmonton, Alberta,  8 p.
  39. Cami, B., Javankhoshdel, S., Lam, J., Bathurst, R.J. and Yacoub, T. 2017. Probabilistic analysis of a tailings dam using 2D composite circular and non-circular deterministic analysis, SRV approach, and RLEM. 70th Canadian Geotechnical Conference, Ottawa, Ontario, 7 p.
  40. Javankhoshdel, S., Cami, B., Bathurst, R.J., Yacoub, T. and Corkum, B. 2017. Probabilistic analysis of cohesive-frictional slopes using the RLEM (circular and con-circular) and the RFEM. 70th Canadian Geotechnical Conference, Ottawa, Ontario, 8 p.
  41. Damians, I.P., Bathurst, R.J., Josa, A., Lloret, A. and Lima, J. 2017. Analysis of vertical facing panel-joint gap in reinforced soil walls. GeoAfrica 2017, Marraekech, Morocco 08-11 October 2017, 8 p.
  42. Luo, N. and Bathurst, R.J. 2016. Probabilistic bearing capacity analysis of smooth strip footings on unreinforced and reinforced layered soils by finite element method. 69th Canadian Geotechnical Conference, Vancouver, BC, 9 p.
  43. Javankhoshdel, S., Bathurst, R.J. and Luo, N. 2016. Probabilistic analysis of cohesive slopes by considering 1D and 2D spatial variability of soil strength parameters using RLEM and RFEM approaches. 69th Canadian Geotechnical Conference, Vancouver, BC, 8 p.
  44. Yu, Y., Luo, N. and Bathurst, R.J. 2016. Soil statistical characteristics using numerically generated random fields for probability analysis of geosynthetic-reinforced soil foundations. 69th Canadian Geotechnical Conference, Vancouver, BC, 6 p.
  45. Luo, N., Bathurst, R.J. and Javankhoshdel, S. 2016.Influence of spatial variability and cross-correlation between soil strength parameters on reliability of reinforced slopes using random finite element method (RFEM). In Proceedings of GeoAmericas 2016, 10-13 April, Miami, Florida, USA, 10 p.
  46. Javankhoshdel, S., Bathurst, R.J. and Luo, N. 2016. Effect of spatial variability and cross-correlation of soil properties on probability of failure of geosynthetic reinforced slopes using limit equilibrium method. In Proceedings of GeoAmericas 2016, 10-13 April, Miami, Florida, USA, 11 p.
  47. Yu, Y., Damians, I.P. and Bathurst, R.J. 2016. Numerical analysis of a unit cell from geosynthetic-reinforced and column-supported embankments using FLAC. In Proceedings of GeoAmericas 2016, 10-13 April, Miami, Florida, USA, 11 p.
  48. Miyata, Y., Bathurst, R.J. and Otani, Y. 2015. Influence of model accuracy on load and resistance factor calibration of steel strip walls. 5th International Symposium on Geotechnical Safety and Risk (ISGSR 2015), Rotterdam, Netherlands, IOS Press, pp. 286-291 (doi:10.3233/978-1-61499-580-7-286).
  49. Lin, P., Bathurst, R.J. and Liu, J. 2015. Evaluation of prediction accuracy of ultimate bond strength of soil nails by the effective stress method. 68th Canadian Geotechnical Conference, Quebec City, Quebec, 6 p.
  50. Luo, N., Bathurst, R.J. and Javankhoshdel, S. 2015. Probabilistic slope stability analysis of reinforced slopes by finite element method. 68th Canadian Geotechnical Conference, Quebec City, Quebec, 7 p.
  51. Yu, Y., Lin, B-H. and Bathurst, R.J. 2015. Influence of choice of small- and large-strain mode in FLAC on soil-geosynthetic interaction problems. 68th Canadian Geotechnical Conference, Quebec City, Quebec, 8 p.
  52. Javankhoshdel, S. and Bathurst, R.J. 2015. Probabilistic analysis of two mechanisms of failure in geosynthetic reinforced slopes using Monte Carlo simulation. 68th Canadian Geotechnical Conference, Quebec City, Quebec, 8 p.
  53. Adroguer, E.G., Damians, I.P., Josa, A., Lloret, A. and Bathurst, R.J. 2015. Sustainability assessment of earth retaining wall structures: preliminary model and simplified application. XVI-ECSMGE-2015, Edinburgh, Scotland, 6 p.
  54. Damians, I.P., Bathurst, R.J., Lima, J., Lloret, A. and Josa, A. 2015. Numerical study of the use of actively-tensioned polymeric strips for reinforced soil walls. XVI-ECSMGE-2015, Edinburgh, Scotland, 6 p.
  55. Tada, T., Miyata, Y. and Bathurst, R.J. 2014. Experimental model on tsunami inundation force for geo-structures. In Proceedings of the 14th International Conference of the International Association for Computer Methods and Advances in Geomechanics September 22-25, 2014, Kyoto, Japan. Oka, Murakami,Uzuoka & Kimoto (Eds.). Taylor & Francis Group, London, pp. 853-856.
  56. Javankhoshdel, S. and Bathurst, R.J. 2014. Probabilistic slope stability analysis of unreinforced and geosynthetic reinforced slopes using Monte Carlo simulation. 67th Canadian Geotechnical Conference, Regina, Saskatchewan, 7 p.
  57. Yu, Y., Damians, I.P., Bathurst, R.J., Lloret A. and Josa A. 2014. Equivalent Interface Properties for FLAC and PLAXIS Models to Simulate Soil-Structure Interactions in MSE Walls. 67th Canadian Geotechnical Conference, Regina, Saskatchewan, 8 p.
  58. Chen, J.F., Yan, Y. and Bathurst, R. 2014. Influence of leveling pad interface properties on soil reinforcement loads for walls on rigid foundations. In Han, J., Puppala, A.J., Shen, S.L., et al (eds). Proceedings of GeoShanghai International Conference 2014: Ground Improvement and Geosynthetics, ASCE, GSP 238, 2014, 481-492. (doi: 10.1061/9780784413401.048).
  59. Chen, J.F. and Bathurst, R.J. 2013. Investigation of interface toe sliding of reinforced soil block face walls using FLAC, Proceedings of Continuum and Distinct Element Numerical Modeling in Geomechanics, Shanghi, China, Itasca International Inc., 15 p.
  60. Damians I.P., Bathurst R.J., Josa A. and Lloret A. 2013. Comparison of finite element and finite difference modelling results with measured performance of a reinforced soil wall, 66th Canadian Geotechnical Conference, Montreal, Quebec, 7 p.
  61. Ezzein, F. and Bathurst, R.J. 2013. Estimation of tensile loads in geogrid specimens tested in a transparent granular soil, 66th Canadian Geotechnical Conference, Montreal, Quebec, 6 p.
  62. Javankhoshdel, S. and Bathurst, R.J.2013. Simplified probabilistic slope stability design charts for cohesive and c−f soils, 66th Canadian Geotechnical Conference, Montreal, Quebec, 7 p.
  63. Damians I.P., Lloret A., Josa A. and Bathurst, R.J. 2013. Influence of facing vertical stiffness on reinforced soil wall design, 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France, pp. 1959-1962.
  64. Fenton, G.A., Naghibi, F. and Bathurst, R.J. 2012. Comparison of geogtechnical LRFD implementations, 65th Canadian Geotechnical Conference, Winnipeg, Manitoba, 6 p.
  65. Ezzein, F. and Bathurst, R.J. 2012. Analysis of geogrid-soil interaction using a transparent granular soil, 5th European Geosynthetics Congress, Valencia, Spain, Vol. 5, pp. 200-204.
  66. Bathurst, R.J., Damians, I.P., Josa, A. and Lloret, A. 2012. Influence of foundation compressibility on reinforcement loads in geosynthetic reinforced soil walls, 5th European Geosynthetics Congress, Valencia, Spain, Vol. 5, pp. 43-47
  67. Miyata, Y., Bathurst, R.J., Konamai, T. and Dobashi, K. 2012. Performance of multi-anchor walls in cyclic transient flooding, Proc. of International Symposium on Ground Improvement, Vol. IV, pp. 123-132, Brussels, 2012.
  68. Naghibi, F., Fenton, G., Griffiths, D. and Bathurst, R. 2012. Settlement of Piles Founded in Spatially Variable Soils. GeoCongress 2012: pp. 2846-2855.
  69. Miyata, Y., Hirakawa, D., Tada, T., Konami, T. and Bathurst, R. 2012. CT-based life cycle management system for geotechnical structures. Proc. of the International Workshop on ICT in Geo-Engineering, Edited by Miyata, Y., Okayasu, T., Furuya, H., Uchimura, T. and Otani, J. Kyoto, Japan.
  70. Ezzein, F. and Bathurst, R.J. 2011. Development of a geosynthetic pullout test apparatus with transparent granular soil. Joint CGS-Pan Am Conference, Toronto, October 2011, 6 p.
  71. Hosney, M., Rowe, R.K. and Bathurst, R.J. 2011. Long-term performance of a geosynthetic clay liner exposed to hydrocarbons in the Arctic. Joint CGS-Pan Am Conference, Toronto, October 2011, 6 p.
  72. Bathurst, R.J., Huang, B.Q. and Allen, T.M. 2011. LRFD Calibration of Steel Reinforced Soil Walls, Geofrontiers 2011, March 2011, Dallas, TX, USA pp. 3429-3438.
  73. Zarnani, S. and Bathurst, R.J. 2011. EPS Seismic Buffers for Earthquake Load Attenuation against Rigid Retaining, Geofrontiers 2011, March 2011, Dallas, TX, USA 10 pp. 3166-3175.
  74. Zarnani, S., Bathurst, R.J. and Take, A. 2010. Shaking table methodology and instrumentation for reinforced soil retaining walls, Proc. CD of the Fifth Intern. Conf. on Recent Adv. in Geo. Erthq. Engrg. and Soil Dyn. and Symposium in Honour of Professor I.M. Idriss, San Diego, CA, paper #8.13, 11p.
  75. Ezzein, F., Bathurst, R.J. and Take, W.A. 2009. Analysis of the influence of foundation compressibility on the behaviour of reinforced soil walls using PIV. 62nd Canadian Geotechnical Conference, Halifax, 8 p.
  76. Huang, B. and Bathurst, R.J. 2009. Limit states design calibration for geogrid pullout in reinforced soil walls. 62nd Canadian Geotechnical Conference, Halifax, 8 p.
  77. Seimens, G. and Bathurst, R.J. 2009. Physical and numerical modeling of 1-D infiltration in sand-geotextile layers. 62nd Canadian Geotechnical Conference, Halifax, 8 p.
  78. Bathurst, R.J., Nernheim, A. and Allen, T.M. 2009. Influence of geosynthetic stiffness on reinforced soil walls, 17th ICSMGE, Alexandria, Egypt, Vol 5, pp. 3473-3477.
  79. Bathurst, R.J. and Siemens, G. 2009. 1-D saturated-unsaturated behaviour of sand-geotextile columns, 17th ICSMGE, Alexandria, Egypt, Vol 5, pp. 3437-3440.
  80. Bathurst, R.J., Huang, B. and Allen, T. 2009. Limit States Design Concepts for Reinforced Soil Walls in North America, 2nd International Symposium on Geotechnical Safety and Risk, Gifu, Japan, pp. 103-109.
  81. Bathurst, R.J. and Zarnani, S. 2008. Numerical modelling of EPS seismic buffers, In proceedings of the12th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG), 1-6 October 2008, Goa, India, 425-432.
  82. Nernheim, A. Huang, B. and Bathurst, R.J. 2008. Using synthetic data from numerical modelling to verify the K-stiffness method for reinforced soil walls, In proceedings of EuroGeo4, Edinburg, 7-10 September 2008, 8 p.
  83. Wang, A. and Bathurst, R.J. 2008. A numerical model for EPS geofoam seismic buffers, In proceedings of the 4th Asian Regional Conference on Geosynthetics, June 17 - 20, 2008, Shanghai, China, 6 p.
  84. Huang, B., Bathurst, R.J. and Hatami, K. 2008. Numerical Study of the Influence of Reinforcement Length and Spacing on Reinforced Soil Segmental Walls of Variable Height, In CD Proceedings of the First Pan American Geosynthetics Conference & Exhibition, 2-5 March 2008, Cancun, Mexico (eds Bathurst &Palmeira), IFAI, p. 1256-1264.
  85. Zarnani, S. and Bathurst, R.J. 2008. Influence of Constitutive Model Type on EPS Geofoam Seismic Buffer Simulations using FLAC, In CD Proceedings of the First Pan American Geosynthetics Conference & Exhibition, 2-5 March 2008, Cancun, Mexico (eds Bathurst & Palmeira), IFAI, p. 868-877.
  86. Pimentel, K.C.A., Bathurst, R.J. and Palmeira, E.M. 2008. Railroad Tracks Reinforced with Geosynthetics: Analysis of Small- and Full-Scale Models, In CD Proceedings of the First Pan American Geosynthetics Conference & Exhibition, 2-5 March 2008, Cancun, Mexico (eds Bathurst & Palmeira), IFAI, p. 1180-1189.
  87. Bathurst, R.J., Miyata, Y. and Allen, T.M. 2007. Recent Developments in the K-Stiffness Method for Geosynthetic Reinforced Soil Walls, IS-Kyushu 2007, Fukuoka, Kyushu, Japan, 6 p.
  88. Zarnani, S. and Bathurst, R.J. 2007. Physical and numerical modeling of EPS geofoam buffers for seismic load reduction on rigid walls, IS-Kyushu 2007, Fukuoka, Kyushu, Japan, 6 p.
  89. Huang, B., Hatami, K. and Bathurst, R.J. 2007. Parametric analysis of a 9-m high reinforced soil wall with different reinforcement materials and soil backfill, IS-Kyushu 2007, Fukuoka, Kyushu, Japan, 6 p.
  90. Zarnani, S. and Bathurst, R.J. 2007. Seismic load attenuation using EPS geofoam buffers in rigid wall applications. CD Proceedings of the 9th Canadian Conference on Earthquake Engineering, Ottawa, Ontario, Canada, 26-29 June 2007, 10 p.
  91. Bathurst, R.J. and Koseki, J. 2007. Recent developments in geosynthetics earthquake engineering. CD Proceedings of the 9th Canadian Conference on Earthquake Engineering, Ottawa, Ontario, Canada, 26-29 June 2007, 10 p.
  92. Bathurst, R.J. and Hatami, K. 2006. Parametric analysis of reinforced soil walls with different height and reinforcement stiffness.Proceedings of the 8th International Conference on Geosynthetics, Yokohama, Japan, September 2006, pp. 1343-1346
  93. Allen, T.M. and Bathurst, R.J. 2006. Design and performance of an 11-m high block-faced geogrid wall. Proceedings of the 8th International Conference on Geosynthetics, Yokohama, Japan, September 2006, pp. 953-956
  94. Hatami, K. and Bathurst, R.J., 2006. A study of the seismic response of reinforced soil retaining walls to rocking ground excitation. Proceedings of the 8th U.S. National Conference on Earthquake Engineering, 18-22 April, 2006, San Francisco, California, USA, Paper No. 1853, 10 p.
  95. Hatami, K. and Bathurst, R.J. 2005. Parametric analysis of reinforced soil walls with different backfill material properties, 2005 North American Geosynthetics Society Conference, Las Vegas, Nevada, 14-16 December 2005, 15 p.
  96. Zarnani, S., Bathurst, R.J. and Gaskin, A. 2005. Experimental investigation of geofoam seismic buffers using a shaking table, 2005 North American Geosynthetics Society Conference, Las Vegas, Nevada, 14-16 December 2005, 11 p.
  97. Zarnani, S. and Bathurst, R.J. 2005. Numerical investigation of geofoam seismic buffers using FLAC, 2005 North American Geosynthetics Society Conference, Las Vegas, Nevada, 14-16 December 2005, 8 p.
  98. Hatami, K., Bathurst, R.J. and El-Emam, M.M. 2005. Acceleration amplification in the backfill of reinforced soil walls of different heights, 3rd Biot Conference on poromechanics, Norman, Oklahoma, USA, May 2005, (Abousleiman, Cheng & Ulm Eds.), Balkema, London, 725-731.
  99. Mukunoki, T., Rowe, R.K., Bathurst, R.J. and Hurst, P. 2005. Application of geosynthetic barrier wall to containment of hydrocarbons in the Arctic, Proceeding of the 16thInternational Conference on Soil Mechanics and Geotechnical Engineering, Osaka, Japan, 12-15 September 2005, Vol. 4, pp. 2415-2418
  100. Hatami, K. and Bathurst, R.J. 2005. Verification of a Numerical Model for Reinforced Soil Segmental Retaining Walls, Geofrontiers 2005, Austin, Texas, 24-26 January 2005, 10 p.
  101. Rowe, R.K., Mukunoki, T., Bathurst, R.J., Rimal, S., Hurst, P. and Hansen, S. 2005. The performance of a composite liner for retaining hydrocarbons under extreme environmental conditions, Geofrontiers 2005, Austin, Texas, 24-26 January 2005, 15 p.
  102. Hatami, K. and Bathurst, R.J. 2004. Construction response of reinforced soil segmental walls with different reinforcement spacing, Ninth International Symposium on Numerical Models in Geomechanics (NUMOG IX), 25-27 August, Ottawa, Ontario, Canada pp. 723-729.
  103. Rowe, R.K., Mukunoki, T. and Bathurst R.J. Compatibility of a GCL with Arctic Diesel before and after freeze and thaw, Proceedings of the Third European Geosynthetics Conference, EuroGeo3, Munich, Germany, 01-04 March 2004, pp. 193-196.
  104. Mukunoki, T., Rowe, R.K., H. Li, M. and Bathurst, R.J. 2003. Hydraulic conductivity of GCLs under freeze-thaw conditions, 56CGS/NAGS Conference, Winnipeg, Manitoba, September 2003 (runner-up NAGS best paper award).
  105. Hatami, K., Bathurst, R.J. and Allen, T. 2003. A calibrated FLAC model for geosynthetic reinforced soil modular block walls at end of construction, FLAC and Numerical Modeling in Geomechanics, Proceedings of the 3rd International FLAC Symposium, Sudbury, Ontario, October 2003, pp. 251-259.
  106. El-Emam, M.M., Bathurst, R.J. and Hatami, K. 2002. Effect of reinforcement design on seismic response of reinforced soil retaining walls, International Conference on Physical Modeling in Geotechnics, (ICPMG), St. Johns, Newfoundland, 10-12 July 2002, pp. 1011-1016.
  107. Bathurst, R.J, Walters, D.L., Hatami, K., Saunders, D.D., Vlachopoulos, N., Burgess, G.P. and Allen, T.M. 2002. Performance testing and numerical modelling of reinforced soil retaining walls, 7th International Geosynthetics Conference, Nice, France, 22-27 September 2002, Vol. 1, pp. 217-220.
  108. Bathurst, R.J, El-Emam, M. and Mashhour, M.M. 2002. Shaking table model study on the dynamic response of reinforced soil walls, 7th International Geosynthetics Conference, Nice France, 22-27 September 2002, Vol. 1, pp. 99-102
  109. Saunders, D.D. and Bathurst, R.J. 2002. The Effects of Reinforcement Stiffness on the Performance of Full-scale Reinforced Segmental Soil Retaining Walls, 7th International Geosynthetics Conference, Nice, France, 22-27 September 2002, Vol. 4, pp. 1585-1588
  110. Li, M., Bathurst, R.J. and Rowe, R.K. 2002. Use of GCLs to Control Migration of Hydrocarbons in Severe Environmental Conditions, International Symposium on Clay Geosynthetic Barriers, Nuremburg, Germany, 16-17 April 2002, pp. 187-197.
  111. Hatami, K., Blatz, J.A. and Bathurst, R.J. 2002. Numerical Modeling Aspects of Geosynthetic Reinforced Soil Retaining Walls and Embankments, 2nd Specialty Conference on Computing in Geotechnique, Winnipeg, Manitoba, 28-30 April 2002, 6 pp. 222-231
  112. Hatami, K. and Bathurst, R.J. 2001. Modeling static response of a segmental geosynthetic reinforced soil retaining wall using FLAC, FLAC and Numerical Modeling in Geomechanics, Proceedings of the 2nd International FLAC Symposium, Lyon, France, 29-31 October 2001, pp. 223-231.
  113. El-Emam, M.M., Bathurst, R.J., Hatami, K. and Mashhour, M.M. Shaking table and numerical modelling of reinforced soil walls, Proceedings of the International Symposium on Earth Reinforcement, IS Kyushu 2001, Kyushu, Japan, November 2001, Vol. 1, pp. 329-334.
  114. Bathurst, R.J. and Walters, D.L. 2000. Lessons learned from full scale testing of geosynthetic reinforced soil retaining walls, GeoEng2000, Melbourne, Australia, November 2000, 14 p.
  115. Bathurst, R.J. and Hatami, K. 1999. Earthquake response analysis of reinforced-soil walls using FLAC, FLAC Symposium on Numerical Modelling in Geomechanics, Minneapolis, Minnesota, 1-3 September 1999, pp. 407-415
  116. Hatami, K. and Bathurst, R.J. 1999. Frequency response analysis of reinforced-soil retaining walls, 8th Canadian Conference on Earthquake Engineering, 13-16 June 1999, Vancouver, BC, pp. 341-346
  117. Bathurst, R.J. and Hatami, K. 1999. Numerical Study of the Influence of Base Shaking on Geosynthetic Reinforced Retaining Walls, Geosynthetics'99, Boston, MA, April 1999, Vol. 2, pp. 963-976
  118. Bathurst, R.J., Burgess, P., Tetreault, M. and Allen, T. 1999. Modeles echelle grandeur nature de massifs reinforce a parements cellulaires au CMR, Rencontres'99, Bourdeaux, France, 12-13 October 1999, pp. 237-242
  119. Bathurst, R.J. 1999. Implications of Full Scale Model Testing to Design of Geosynthetic-Reinforced Walls, 52nd Canadian Geotechnical Conference, Regina, Saskatchewan, 25-27 October 1999, pp. 83-90
  120. Chenaf, D., Stampfli, N., Chapuis, R.P. and Bathurst, R.J. 1999. Uniaxial compression tests on diesel contaminated frozen silty soil specimens, 52nd Canadian Geotechnical Conference, Regina, Saskatchewan, 25-27 October 1999, pp. 505-512
  121. Bathurst, R.J. and Hatami, K. 1998. Influence of Reinforcement Properties on Seismic Response and Design of Reinforced Soil Retaining Walls, 51'st Canadian Geotechnical Conference, 5-7 October 1998, Edmonton, Alberta, Vol. 2, p. 479-486.
  122. Bathurst, R.J. and Hatami, K. 1998. Influence of Reinforcement Stiffness, Length and Base Condition on Seismic Response of Geosynthetic Reinforced Retaining Walls, 6'th International Conference on Geosynthetics, Atlanta, GA, March 1998, Vol. 2 pp. 613-616.
  123. Raymond, G.P., Bathurst, R.J. and Hajek, J. 1998. A geotextile-wrapped aggregate highway drain evaluation, 6'th International Conference on Geosynthetics, Atlanta, GA, March 1998, Vol. 2 pp. 929-938.
  124. Knight, M. and Bathurst, R.J. 1997. Finite Element Analysis of Reinforced Geocell-Soil Covers over Large Span Conduits, 5'th International Symposium on Numerical Models in Geomechanics, NUMOG V, July 1997, pp. 269-274
  125. Bathurst, R.J., Cai, Z. and Simac, M.R. 1997. Seismic Performance Charts for Geosynthetic Reinforced Segmental Retaining Walls, Geosynthetics'97, 11-13 March 1997, pp. 1001-1014
  126. Simac, M.R., Bathurst, R.J. and Fenessey, T.W. 1997. Design of Gabion-Geosynthetic Retaining Walls on the Tellico Plains to Robbinsville Highway, Geosynthetics'97, 11-13 March 1997, pp. 105-118
  127. Bathurst, R.J., Simac, M.R., and Sandri, D. 1995. Lessons Learned from the Construction Performance of a 14m High Segmental Retaining Wall, Proceedings of Geosynthetics: Lessons Learned from Failures, Nashville, Tennessee, 20 February 1995, pp. 15.
  128. Bathurst, R.J. and Rothenburg, L. 1994. Investigation of Plane Elliptical Particle Assemblies under Principal Stress Rotations, 8'th International Conference of the International Association for Computer Methods and Advances in Geomechanics, 22-28 May 1994, pp. 1325-1330
  129. Rothenburg, L., Bathurst, R.J., and Berlin, A.A. 1993. Micromechanical Response of Simulated Materials under Principal Stress Rotation, Powders and Grains 93: 2nd International Conference on Micromechanics of Granular Media, Birmingham, UK, 12-16 Jul 1993, pp. 147-153
  130. Bathurst, R.J. and Rothenburg, L. 1992. Investigation of Anisotropic Assemblies of Plane Elliptical Particles, 4'th International Symposium on Numerical Models in Geomechanics, NUMOG IV, August 1992, pp. 47-54
  131. Karpurapu, R., and Bathurst. R.J. 1992. Analysis of Geosynthetic Reinforced Soil Walls by Finite Element Methods, 4'th International Symposium on Numerical Models in Geomechanics, NUMOG IV, August 1992, pp. 861-870
  132. Berlin, A.A., Rothenburg, L. and Bathurst, R.J. 1991. Mechanics of Disordered Glasslike Bodies, Proceedings of the 3rd Japan-USSR Joint Symposium on Advanced Composite Materials, Chemical Physics, USSR Academy of Sciences- Institute of Chemical Physics, 319-345, September 30- October 6, 1991
  133. Yogendrakumar, M., Bathurst, R.J. and Finn, W.D. Liam. 1991. Response of Reinforced Soil Walls to Earthquake Loads, IX Panamerican Conference on Soil Mechanics and Foundation Engineering, Chile, pp. 10, August 1991
  134. Yogendrakumar, M., Bathurst, R.J. and Finn, W.D. Liam. 1991. Seismic Response of Reinforced Soil Retaining Walls, Proceedings of the 7th Conference of the International Association for Computer Methods and Advances in Geomechanics, pp. 6, 1991
  135. Yogendrakumar, M., Bathurst, R.J and Finn, W.D.L. 1991. Response of Reinforced Soil Slopes to Earthquake Loadings, 6'th Canadian Conference on Earthquake Engineering, Toronto, pp. 445-452, June 1991
  136. Simac, M.R., Bathurst, R.J. and Goodrum, R.A. 1991. Design and Analysis of Three Reinforced Soil Retaining Walls, Geosynthetics'91, Vol. 2, pp. 781-798, February 1991
  137. Thallak, S., Rothenburg, L., Dusseault, M., and Bathurst, R.J. 1990. Numerical Simulation of Hydraulic Fracturing in a Discrete Element System, 2'nd European Conference on the Mathematics of Oil Recovery, pp. 6. September 1990
  138. Raymond, G.P. and Bathurst, R.J. 1990. Test Results on Exhumed Railway Track Geotextiles, 4'th International Conference on Geotextiles and Geomembranes, The Hague, Holland, Vol. 1, pp. 197-202. 27 May-1 June 1990
  139. Raymond, G.P. and Bathurst, R.J. 1990. Discussion of Test Results on Exhumed Railway Track Geotextiles, 4'th International Conference on Geotextiles and Geomembranes, The Hague, Holland, Vol 3, pp. 1033-1034. 27 May-1 June 1990
  140. Bathurst, R.J. and Jarrett, P.M., Grid-Reinforced Retaining Wall Model Tests, Technical Communication, 4'th International Conference on Geotextiles and Geomembranes, The Hague, Holland, p. 119, 27 May-1 June 1990.
  141. Rothenburg, L., Bathurst, R.J. and Dusseault, M. 1989/ Micromechanical Ideas in Constitutive Modelling of Granular Materials, Powders and Grains, Int. Conf. on Micromechanics of Granular Media, Clermont-Ferrand, France, pp. 355-363, September 1989
  142. Bathurst, R.J., Benjamin, D.J. and Jarrett, P.M. 1989. An Instrumented Geogrid Reinforced Soil Wall, Proceedings of the 12'th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, pp. 1223-1226, August 1989
  143. Rothenburg, L., Bathurst, R.J. and Matyas, E. 1989. Mechanisms of Fabric Evolution in Granular Media, Proceedings of 12'th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, pp. 753-756, August 1989
  144. Jarrett, P.M. and Bathurst, R.J. 1987. Strain Development in Anchorage Zones, Geosynthetics '87, New Orleans, 1987
  145. Becker, D.E., Crooks, J.H.A., Rothenburg, L., Yam, C.C. and Bathurst, R.J. 1987. Behaviour of the Second Stage of Gloucester Test Fill: Prediction and Performance, Proceedings of the Gloucester Test Fill Workshop, NRCC, pp. 20, 1987
  146. Bathurst, R.J., Raymond, G.P. and Jarrett, P.M. 1986. Performance of Geogrid-Reinforced Ballast Railroad Track Support, 3'rd International Conference on Geotextiles, Vienna, Vol. 1, pp. 43-48, 1986
  147. Jarrett, P.M. and Bathurst, R.J. 1985. Frictional Development at a Gravel-Geosynthetic-Peat Interface, 2'nd Canadian Symposium on Geotextiles and Geomembranes, 1985.

INVITED PAPERS

  1. Bathurst, R.J. 2024. Geosynthetic reinforced soil walls in seismic areas. 18th World Conference on Earthquake Engineering (WCEE2024). Milan, Italy. 30 June to 5 July 2024. 11 p.
  2. Bathurst, R.J., Naftchali, F.M., and Jamshidi Chenari, R. 2023. The role of geosynthetic stiffness in soil reinforcement applications (invited keynote paper). GeoAfricas 2023. Cairo, Egypt, February 2023.
  3. Bathurst, R.J. 2018. The basics of probabilistic internal stability analysis and design of reinforced soil walls explained. In proceedings of 11 International Conference on Geosynthetics, Seoul, Korea, 8 p.
  4. Bathurst, R.J. 2017. Kersten Lecture: Analysis, Design and Modelling of Geosynthetic Reinforced Soil Walls. 65th Annual Geotechnical Engineering Conference, University of Minnesota, Minnesota, MN, 24 February pp. 1-31.
  5. Bathurst, R.J. 2014. Giroud Lecture: Challenges and recent progress in the analysis, design and modelling of geosynthetic reinforced soil walls, CD Proceedings of the 10th International Geosynthetics Conference, Berlin, 21-25 September 2014
  6. Allen, T.M. and Bathurst, R.J. 2013. Comparison of working stress and limit equilibrium behavior of reinforced soil walls. ASCE Geotechnical Special Publication No. 230, "Sound Geotechnical Research to Practice Honoring Robert D, Holtz II, pp. 500-514
  7. Bathurst, R.J., Allen, T.M., Miyata, Y. and Huang, B. 2013. LRFD calibration of metallic reinforced soil walls. ASCE Geotechnical Special Publication No. 229, "Foundation Engineering in the Face of Uncertainty Honoring Fred H. Kulhawy, pp. 585-601
  8. Miyata, Y. and Bathurst, R.J. 2012. Invited technical paper. Geogrid pullout model for limit state design of reinforced soil wall, Geosynthetics Technical Information, Japan Chapter of IGS, 28-2, 8 pp. (in Japanese).
  9. Bathurst, R.J., Miyata, Y. and Allen, T.M. 2010. Invited keynote paper, Facing displacements in geosynthetic reinforced soil walls. Earth Retention Conference 3 (ER2010)., ASCE Geo-Institute, Bellevue, Washington 1-4 August, 18 p.
  10. Bathurst, R.J., Allen, T.M. and Huang B. 2010. Invited panel paper, Current issues for the internal stability design of geosynthetic reinforced soil. 9th International Geosynthetics Conference, Guaruja, Brazil, 23-27 May, pp. 533-546.
  11. Bathurst, R.J. 2009.Invited keynote paper, Recent Developments in Reinforced Soil Wall Testing, Analysis and Design,GeoAfrica 2009, 2 - 5 September 2009, Cape Town, South Africa.
  12. Allen, T.M. and Bathurst, R.J. 2009. Reliability of geosynthetic wall designs and factors influencing wall performance. 4th International GSI-Taiwan Geosynthetics Conference, Pingtung, Taiwan, pp. 95-123.
  13. Miyata, Y. and Bathurst, R.J. 2009. Invited technical paper, Prediction method for reinforcement loads in geosynthetic-reinforced soil walls - Outline and example of K-stiffness method, Geosynthetics Technical Information, Japan Chapter of IGS, 25-2, pp.12-19 (in Japanese).
  14. Bathurst, R.J., Huang, B. and Hatami, K. 2008. Invited paper, Numerical modeling of geosynthetic reinforced retaining walls, In proceedings of the12th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG), 1-6 October 2008, Goa, India, 4071-4080.
  15. Bathurst, R.J. Invited panel paper. Working stress design for geosynthetic reinforced soil walls, IS-Kyushu 2007 (eds Otani, Miyata & Mukunoki) Fukuoka, Japan, Taylor & Francis Group, p. 105-112.
  16. Bathurst, R.J. Reinforced Soil Retaining Wall Testing, Modeling and Design, Invited keynote paper,12'th Indian Geotechnical Conference, Madras, India, 14-16 December 2006, p. 21-32.
  17. Koseki, J., Bathurst, R.J., Guler, E., Kuwano, J. and Maugeri, M. Seismic stability of reinforced soil walls, Invited keynote paper,8th International Conference on Geosynthetics, Yokohama, Japan, 18-22 September 2006. 30 p.
  18. Bathurst, R.J., and Hatami, K. Physical to computational modelling of reinforced soil walls under static loading, Invited keynote paper,2nd International Conference on Physical Modeling in Geotechnics, (ICPMG), Hong Kong, 4-6 August 2006, Vol. 1, pp. 3-17.
  19. Bathurst, R.J. General Report. Technical Session 2b:Reinforcement and Stone Columns, Invited general report, Proceedings of the 16thInternational Conference on Soil Mechanics and Geotechnical Engineering, Osaka, Japan, 12-15 September 2005, Preprints volume, pp. 101-105.
  20. Bathurst, R.J. and Kaliakin, V.N. Review of numerical models for geosynthetics in reinforcement applications,Invited issue paper, Computer Methods and Advances in Geomechanics:11th International Conference of the International Association for Computer Methods and Advances in Geomechanics, 19-24 June 2005, Torino, Italy, Vol. 4, pp. 407-416.
  21. Bathurst, R.J. Lessons Learned from Physical Modelling of Geosynthetic Walls and Embankments,Invited keynote lecture,Canadian Young Geotechnical Engineers and Geoscientists Conference, Manoir St-Castin, October 27-30, 2004, Quebec City, Quebec, Canada, 19 p.
  22. Bathurst, R.J., Allen, T. and Walters, D. Reinforcement Loads in Geosynthetic Walls and the Case for a New Working Stress Design Method,Invited keynote paper Mercer Lecture,56CGS/NAGS Conference, Winnipeg, Manitoba, 29 September - 1 October 2003, Vol. 1, pp. 56-72.Third European Geosynthetics Conference, Munich, Germany, 1-4 March, 2004, Vol 1. pp. 19-31.GeoAsia 2004, Seoul Korea, 21-23 June 2004. pp. 3-25
  23. Bathurst, R.J., Walters, D.L., Esfehani, M., El-Emam, M. and Blatz, J.A. Physical modelling of geosynthetic walls and embankments,Invited keynote paper,International Conference on Physical Modeling in Geotechnics, (ICPMG), St. Johns, Newfoundland, 10-12 July 2002, pp. 21-30.
  24. Bathurst, R.J., Walters, D.L., Hatami. K. and Allen. T.M., Full-scale performance testing and numerical modelling of reinforced soil retaining walls,Special plenary lecture:International Symposium on Earth Reinforcement, IS Kyushu 2001, Fukuoka, Japan, 14 November 2001, Vol. 2, pp. 777-799
  25. Bathurst, R.J. and Hatami, K. Review of numerical modeling of geosynthetic reinforced soil walls,Invited theme paper, Computer Methods and Advances in Geomechanics: 10th International Conference of the International Association .for Computer Methods and Advances in Geomechanics, 7-12 January 2001, Tucson, Arizona, USA, Vol. 2, pp. 1223-1232.
  26. Bathurst, R.J., Walters, D., Vlachopoulos, N., Burgess, P. and Allen, T.M., Full Scale Testing of Geosynthetic Reinforced Walls, Invited keynote paper, ASCE Special Publication No. 103, Advances in Transportation and Geoenvironmental Systems using Geosynthetics,Proceedings of Geo-Denver 2000, 5-8 August 2000, Denver, Colorado, pp. 201-217.
  27. Bathurst, R.J. Lessons Learned from Full Scale Model Tests of Reinforced Walls and Slopes, Invited keynote paper,Proceedings of the 2nd Asian Geosynthetics Conference, Kuala Lumpur, Malaysia, 29-31 May Vol. 1, 2000, pp. 1-22 andInvited keynote paperProceedings of XI Italian Conference on Geosynthetics, Bologna, Italy, 15 October 1999, 22 pp. Published in L'ingegnere e l'architetto,Italian Journal of Civil Engineering and Architecture, 2000, vol. 7, no. 1, 2000, pp. 17-36. (in English).
  28. Bathurst, R.J., Walters, D., Vlachopoulos, N., Burgess, P. and Allen, T.M., Recent Full Scale Testing of Geosynthetic Reinforced Segmental Retaining Walls, Invited keynote paper,Proceedings of 3rd Brazilian Symposium on Geosynthetics/1st South American Symposium on Geosynthetics, Rio de Janeiro, Brazil, 19-22 October 1999, Vol. 2, pp. 21-35.
  29. Bathurst, R.J. Full Scale Testing of Geosynthetic Reinforced Walls and Slopes, Invited keynote paper,Proceedings of XI Brazilian Conference on Soil Mechanics and Geotechnical Engineering, Brasilia, Brazil, October 1998, Vol. 4, pp. 45-63.
  30. Bathurst, R.J. Recent Developments in Reinforced Segmental Retaining Walls in North America, Invited keynote paper,'97 Geosynthetics Conference, 18 November 1997, Seoul, Korea, pp. 3-20.
  31. Bathurst, R.J., Cai, Z,. Alfaro, M. and Pelletier, M., Seismic Design Issues for Geosynthetic Reinforced Segmental Retaining Walls, Invited keynote paper,International Symposium on Mechanically Stabilized Backfill, J. Wu (ed), Denver Colorado, 6-8 February 1997, Balkema, p. 79-97
  32. Bathurst, R.J. and Alfaro, M.C., Review of seismic design, analysis and performance of geosynthetic reinforced walls, slopes and embankments, Invited keynote paper, IS-Kyushu'96, 3'rd International Symposium on Earth Reinforcement, Fukuoka, Kyushu, Japan, 12-14 November 1996, Balkema, Vol. 2, pp. 887-918.
  33. Bathurst, R.J., RMCC Research on Seismic Design and Performance of Geosynthetic Reinforced Segmental Retaining Walls, Recent Case Histories and Developments in the Design of Geosynthetic-Reinforced Soil Retaining Walls, Tokyo, Japan, 9 November 1996, 16p.
  34. Bathurst, R.J., Cai, Z. and Pelletier, M., Seismic Design and Performance of Geosynthetic Reinforced Segmental Retaining Walls, Invited special paper, 1996 Vancouver Geotechnical Symposium, Vancouver, 6-7 June 1996, 24p.
  35. Bathurst, R.J. and Simac, M.R., Recent Developments in Reinforced Segmental Retaining Wall Technology in North America, Invited keynote paper, Geossinteticos '95, 26-28 June 1995, Sao Paulo, Brazil, pp. 17-30.
  36. Bathurst, R.J. and Simac, M.R., Geosynthetic Reinforced Segmental Retaining Wall Structures in North America, Invited keynote paper,5th International Conference on Geotextiles, Geomembranes and Related Products, 6-9 September 1994, Singapore, Vol. 4, pp. 1275-1298.
  37. Bathurst R.J. and Karpurapu, R.G., Behaviour Of Geosynthetic Reinforced Soil Walls: Numerical Modelling Versus An Instrumented Structure,7th Italian Conference on Geosynthetics in Earth Works, Retaining Structures and Landfills, Bologna, Italy, pp. 21-28, 21 October 1993.
  38. Bathurst, R.J. and Crowe, E.R., Recent case histories of flexible geocell retaining walls in North America, Recent Case Histories of Permanent Geosynthetic-Reinforced Soil Retaining Walls, (editors Tatsuoka and Leshchinsky), Tokyo, Japan, pp. 3-20, 6-7 November 1992 (published by A.A.Balkema, Rotterdam)
  39. Bathurst, R.J., Performance of Several Instrumented Geogrid Reinforced Soil Retaining Walls In North America, 2nd Tokyo Geotextile Seminar, Tokyo, Japan, pp. 17, 16 November 1992.
  40. Bathurst, R.J., Case Study of a Monitored Propped Panel Wall, Proceedings of the International Symposium on Geosynthetic-Reinforced Soil Retaining Walls, Denver Colorado, pp. 159-166, August 1991 (published by A.A. Balkema)
  41. Karpurapu, R.G. and Bathurst, R.J., Finite Element Predictions for the Colorado Geosynthetic-Reinforced Soil Retaining Walls, Proceedings of the International Symposium on Geosynthetic-Reinforced Soil Retaining Walls, Denver Colorado, pp. 329-341, August 1991 (published by A.A. Balkema)
  42. Karpurapu, R.G. and Bathurst, R.J., Discussion and Class C Predictions for the Colorado Trial Walls, Proceedings of the International Symposium on Geosynthetic-Reinforced Soil Retaining Walls, Denver Colorado, pp. 343-346, August 1991 (published by A.A. Balkema)
  43. Bathurst, R.J., Instrumentation of Geosynthetic Reinforced Soil Retaining Walls, Insitu Testing and Monitoring, Recent Advances and Applications, CGS Southern Section Seminar, pp. 21. September 1990

CONFERENCE and SYMPOSIUM PROCEEDINGS (ABSTRACTS PEER REVIEWED)

  1. Bathurst, R.J. 2024. Developments in reliability-based design for reinforced soil structures. Technical Workshop on Reinforcement and Drainage in Soil Structures. June 2024, Barcelona. pp. 49-52.
  2. Bathurst, R.J. and Naftchali, F.M. 2024. Numerical modelling of geosynthetic reinforced fills over voids. Technical Workshop on Reinforcement and Drainage in Soil Structures. June 2024, Barcelona. pp. 31-44.
  3. Moncada, A.A., Damians, I.P., Olivella, S. and Bathurst, R.J. 2024. Insights on the numerical modelling of geosynthetic reinforced soil walls including varying atmospheric conditions. Technical Workshop on Reinforcement and Drainage in Soil Structures. June 2024, Barcelona. pp. 33-36.
  4. Li, F., Bathurst, R.J. and Zheng, Y. 2024. Numerical investigation on the interaction effect of back-to-back MSE walls with different facing conditions. Technical Workshop on Reinforcement and Drainage in Soil Structures. June 2024, Barcelona. pp. 37-40.
  5. Jamshid Chenari, R. and Bathurst, R.J. 2024. Stochastic analysis of reinforced structures with anisotropic random soil properties. Applied Numerical Modeling in Geomechanics – 2024 – Hazzard, Katsaga, Sanftenberg & Nelson (eds.). Proceedings of 6th International ITASCA Symposium, Toronto, June 2024.
  6. Moncada, A.A., Damians, I.P., Olivella, S. and Bathurst, R.J. 2024. Simulating soil reinforcement interaction using CODE_BRIGHT. Workshop of CODE_BRIGHT Users: 22 April 2024, Barcelona, Spain, 5 p.
  7. Moncada, A.A., Damians, I.P., Olivella, S. and Bathurst, R.J. 2021. Modelling the effect of in-soil temperature and relative humidity on performance of pet strap soil reinforcement products. 12th Workshop on CODE_BRIGHT. Universitat Politècnica de Catalunya·BarcelonaTech (UPC), Barcelona, Spain, 22 September 2021. https://deca.upc.edu/en/projects/code_bright/workshop/doc/ abstracts
  8. Fujita, T., Miyatake, H., Bathurst, R. and Miyata, Y. 2019. Investigation of geosynthetic reinforced soil embankments.Proc. of 8th Civil Engineering Conference in the Asian Region, Tokyo, Japan (2 pages).
  9. Damians, I.P., Bathurst, R.J., Olivella, S., Lloret, A. and Josa, A. 2017. 3D Modelling of reinforced soil walls, 9th Workshop of CODE_BRIGHT, 23 May, Department of Civil and Environmental Engineering of the Technical University of Catalonia (UPC), Barcelona, Spain. 4 p.
  10. Miyata, Y. and Bathurst, R.J. 2014. Modified pullout capacity models for limit state design of geogrid reinforced soil wall. 10th Japan Society of Materials Science annual symposium on ground improvement, Sendai, Japan, 6-7 November, pp. 247-250 (in Japanese)
  11. Tada, T., Miyata, Y. and Bathurst, R.J. 2014. Hydraulic energy dissipation model for predicting of tsunami inundation force acting on geo-structures. Proc. of Japanese Geotechnical Society Special Symposium on Tohoku Earthquake 2011, pp. 743-747 (in Japanese).
  12. Miyata, Y. and Bathurst, R.J. 2014. Creep strength model for reliability design of geogrid reinforced soil wall. Annual Japanese Geotechnical Society Conference, 2 p, (in Japanese)
  13. Damians, I.P., Olivella, S., Lloret, A., Josa, A. and Bathurst, R.J.; 2013. Modelling 3D mechanical interfaces with continuum elements. Proceedings of the 5th Workshop of CODE_BRIGHT Users, Barcelona, Catalunya, Spain, 7th May 2013, 4 p.
  14. Miyata, Y., Bathurst, R.J. and Konami, T. 2012. Analysis of partial safety factor of multi-anchor reinforced soil walls. Geo-Kanto 2012, 9th JGS Kanto-branch annual conference, Oct. 5, 2012, Paper No: Structure 1-1. 2 p. (in Japanese)
  15. Miyata, Y. and Bathurst, R.J. 2012. Modified pullout capacity design models for steel strip reinforced soil wall. 10th Japan Society Material Science Symposium on Ground Improvement. 10 October 2012, Kyoto, Japan, 6 p. (in Japanese)
  16. Santos, E.C.G., Palmeira, E.M. and Bathurst, R.J. 2012. Use of recycled construction and demolition waste as backfill material in reinforced soil walls. Second Pan American Geosynthetics Conference & Exhibition, GeoAmericas 2012, Lima, Peru - May 2012, 10 p.
  17. Miyata Y. and Bathurst R.J. 2012. Revised design model on pullout resistance of geogrid. Annual Japanese Geotechnical Society Conference, 2 p, (in Japanese)
  18. Miyata, Y., Bathurst, R.J. and Konami, T. 2011. Influence of model accuracy on load and resistance factor calibration of multi-anchor walls. 3rd International Symposium on Geotechnical Safety and Risk (ISGSR 2011) Munich Germany, 2-3 June 2011, 8 p.
  19. Miyata, Y., Bathurst, R.J. and Konami, T. 2011. LRFD calibration for the pullout failure mode of MAW. In proceedings of the 66th Japan Society of Civil Engineers Annual Meeting, Ehime, Japan, 2 p.
  20. Bathurst, R.J. and Zarnani, S. 2011. Recent research on EPS geofoam seismic buffers, 4th International Conference on the use of Geofoam Blocks in Construction Applications (EPS 20011) Lillestrom, Norway, 6-8 June 2011, 10 p.
  21. Miyata Y., Hirakawa D., Tada T., Konami T. and Bathurst R.J. 2011. ICT-field observation system for LRFD calibration of reinforced soil walls. Annual Japanese Geotechnical Society Conference, 2 p, (in Japanese)
  22. Wang, D. and Bathurst, 2011. Research on Shock Mitigation on Circular Tunnels Using Expanded Polystyrene. International Conference on Electric Technology and Civil Engineering (ICETCE), 22-24 April 2011,2528-2531(in Chinese)
  23. Miyata, Y., Bathurst, R.J. and Konami, T. 2010. Uncertainty of load-resistance models in design of multi-anchor reinforced soil walls. 9th Japan Society of Materials Science annual symposium on ground improvement, Fukui, Japan, 18-19 November, 6 p, (in Japanese)
  24. Yang, K-H., Zornberg, J.C. and Bathurst, R.J. 2010. Mobilization of reinforcement tension within geosynthetic-reinforced soil structures. Earth Retention Conference 3 (ER2010), ASCE Geo-Institute, Bellevue, Washington 1-4 August, 11 p.
  25. Zarnani, S. and Bathurst, R.J. 2010. Numerical parametric study of geofoam seismic buffers with different constitutive models. CD Proceeding of the 9th International Geosynthetics Conference, Guaruja, Brazil, May 2010. pp. 1665-1668
  26. Siemens, G. and Bathurst, R.J. 2010. Physical and numerical modeling of infiltration in sand-geotextile systems. CD Proceeding of the 9th International Geosynthetics Conference, Guaruja, Brazil, May 2010. pp. 1251-1254
  27. Santos, E.C.G., Palmeira, E.M. and Bathurst, R.J. 2010. Construction of a full-scale wrapped face geogrid reinforced wall using recycled construction and demolition waste as backfill material. CD Proceeding of the 9th International Geosynthetics Conference, Guaruja, Brazil, May 2010. pp. 1769-1772
  28. Miyata, Y., Konami, T. and Bathurst, R.J. 2009. Reinforcement loads in multi-anchor walls built in shoreline areas. Geo-Kanto 2009, 6th JGS Kanto-branch annual conference, Nov. 11-12, 2009, pp. 316-319. (in Japanese)
  29. Kojima, K., Miyata, Y. and Bathurst, R.J. 2009. Prediction model of reinforcement load for steel strip reinforced soil wall, CD Proceeding of the 36th Japan Society of Civil Engineering (JSCE) Kanto Branch Conference, March 2009, Chiba, Japan, III-46, 2 p. (in Japanese)
  30. Tanigaki, K., Miyata, Y., Konami, T. and Bathurst, R.J. 2008. Prediction model of reinforcement loads in Multi-anchored reinforced soil walls, In CD Proceeding of the 35th Japan Society of Civil Engineering (JSCE) Kanto Branch Conference, 10-11 March 2008, Tokyo, Japan, III-48 (in Japanese)
  31. Miyata, Y. and Bathurst, R.J. 2008. Prediction model of reinforcement loads for limit states design of geosynthetic reinforced soil walls, In CD Proceeding of the 43rd Japanese Geotechnical Society (JGS) Annual Conference, 9-12 July 2008, Hiroshima, Japan, 1523-1524 (in Japanese)
  32. Ezzein, F. and Bathurst, R.J. Influence of foundation compressibility on reinforced soil retaining wall behaviour, 61st Canadian Geotechnical Conference, Edmonton, Alberta, September 2008, 8 p.
  33. Nernheim, A. and Bathurst, R.J. The influence of reinforcement spacing on the performance of three geosynthetic reinforced soil retaining walls, 61st Canadian Geotechnical Conference, Edmonton, Alberta, September 2008, 8 p.
  34. Nernheim, A. and Bathurst, R.J. Influence of facing batter on the performance of three geosynthetic reinforced soil walls, 60th Canadian Geotechnical Conference, Ottawa, Ontario, October 2007, 9 p.
  35. Ezzein, F. and Bathurst, R.J. Influence of vertical toe condition on reinforced soil retaining wall behaviour, 60th Canadian Geotechnical Conference, Ottawa, Ontario, October 2007, 10 p.
  36. Zarnani, S. and Bathurst, R.J. Numerical parametric study of EPS geofoam seismic buffers, 60th Canadian Geotechnical Conference, Ottawa, Ontario, October 2007, 9 p.
  37. Huang, B., Bathurst, R.J. and Hatami, K. Numerical study of the influence of block interface stiffness on reinforced soil segmental walls of variable height, 60th Canadian Geotechnical Conference, Ottawa, Ontario, October 2007, 8 p.
  38. Rimal, S., Rowe, R.K. and Bathurst, R.J. Durability of fluorinated high density polyethylene (f-HDPE) geomembrane exposed to hydrocarbons in the Arctic, 60th Canadian Geotechnical Conference, Ottawa, Ontario, October 2007, 8 p.
  39. Ezzein, F. and Bathurst, R.J., Influence of Horizontal Toe Restraint on Reinforced Soil Retaining Wall Behaviour, 59th Canadian Geotechnical Conference, Vancouver, BC, October 2006, 7 p.
  40. Zarnani, S. and Bathurst, R.J., Application of EPS geofoam as a seismic buffer:numerical study using FLAC, 59th Canadian Geotechnical Conference, Vancouver, BC, October 2006, 8 p.
  41. Krahn, T., Blatz, J., Alfaro, M., and Bathurst, R., Evaluation of sandbag dike performance using a full-scale test facility, 58th Canadian Geotechnical Conference, Quebec City, Saskatoon, October 2005, 8 p.
  42. Bathurst, R.J., Allen, T.M. and Nowak, A. Load and Resistance Factor Design (LRFD) Calibrationf for Pullout of Steel Reinforced Soil Walls, 58th Canadian Geotechnical Conference, Quebec City, Saskatoon, October 2005, 8 p.
  43. Elbanna, M. and Bathurst, R.J. A New Apparatus to Investigate Geosynthetic-Soil Interaction, 58th Canadian Geotechnical Conference, Quebec City, Saskatoon, October 2005, 8 p.
  44. Bathurst, R.J., Zeeb, B., Reimer, K. and Rowe, R.K. Case Study of a Novel Geocomposite Barrier System for Hydrocarbon Containment on Brevoort Island, Assessment and Remediation of Contaminated Sites in Arctic and Cold Climates - ARCSACC 2005, Edmonton, Alberta, 8-10 May, 2005, 10 p.
  45. Hatami, K., Bathurst, R.J., El-Emam, M. and Allen, T.M. Numerical Models for Reinforced Soil Walls, Canadian Young Geotechnical Engineers and Geoscientists Conference, Manoir St-Castin, October 27-30, 2004, Quebec City, Qubec, Canada, 6 p.
  46. Krahn, T., Blatz, J., Bathurst, R. and Alfaro, M., Assessment of Sandbag Dike Interface Shear using Two Direct Shear Devices, 57th Canadian Geotechnical Conference, Quebec City, Quebec, 24-28 October 2004, 6 p.
  47. El-Emam, M., Bathurst, R.J. and Hatami, K. Numerical Parametric Study of Reinforced Soil Walls Subjected to Earthquake Load, 57th Canadian Geotechnical Conference, Quebec City, Quebec, 24-28 October 2004, 8 p.
  48. Hatami, K. and Bathurst, R.J., Numerical Investigation of the Influence of Reinforcement Configuration on Construction Response of Reinforced Soil Segmental Walls, 57th Canadian Geotechnical Conference, Quebec City, Quebec, 24-28 October 2004, 8 p.
  49. Mukunoki, T., Rowe, R.K. and Bathurst, R.J., Permeability of Jet Fuel through GCLs under Arctic Climatic Conditions, 57th Canadian Geotechnical Conference, Quebec City, Quebec, 24-28 October 2004, 8 p.
  50. El-Emam, M., Bathurst, R.J. and Hatami, K. 2004, Numerical modeling of reinforced soil retaining walls subjected to base acceleration, 13th World Conference on Earthquake Engineering, Vancouver BC, 1-6 August 2004, 15 p.
  51. Bathurst, R.J., Alfaro, M.C. and Hatami, K., 2004, Pseudo-static Seismic Design of Geosynthetic Reinforced Soil Retaining Structures, Asia Conference on Earthquake Engineering, Manila. Philippines, 5-6 March 2004, Vol 2, pp. 149-160
  52. Shinoda, M., Horii, K., Bathurst, R., and Tatsuoka,F., 2002, Investigation of tensile strength after creep and stress relaxation of geogrids, Proc. 37th Japan National Conference on Geotechnical Engineering, Japanese Geotechnical Society, 2002, 773-774. (in Japanese).
  53. Li, H.M., Rowe, R.K., Bathurst, R.J., Sangam, H.P. and Bady, K., Installation and Monitoring of a Geocomposite Barrier System on Brevoort Island, 55th Canadian Geotechnical Conference, Niagara Falls, Ontario, 20-23 October 2002, 6 p
  54. Vlachopoulos, N., Bathurst, R.J., Walters, D. and Burgess, P., The Influence of Facing Rigidity on the Performance of Two Geosynthetic Reinforced Soil Retaining Walls, 55th Canadian Geotechnical Conference, Niagara Falls, Ontario, 20-23 October 2002, 8 p
  55. Meleschuk, J.L.C., Bathurst, R.J. and Ho, A.F., Numerical Modelling of Two-Dimensional Unsaturated Flow Behaviour in Layered Sand and Geotextile Systems, 55th Canadian Geotechnical Conference, Niagara Falls, Ontario, 20-23 October 2002, 8 p
  56. Hatami, K. and Bathurst, R.J., Numerical Simulation of a Segmental Retaining Wall Under Uniform Surcharge Loading, 55th Canadian Geotechnical Conference, Niagara Falls, Ontario, 20-23 October 2002, 8 p
  57. Esfehami, M. and Bathurst, R.J., Influence of Fines Content on Reinforced Soil Retaining Wall Behaviour, 55th Canadian Geotechnical Conference, Niagara Falls, Ontario, 20-23 October 2002, 8 p
  58. El-Emam, M. and Bathurst, R.J., Effect of Facing Configuration on the Seismic Response of Reinforced Soil Walls, 55th Canadian Geotechnical Conference, Niagara Falls, Ontario, 20-23 October 2002, 8 p
  59. Blatz, J.A. and Bathurst, R.J., Behaviour of Full-scale Reinforced Embankments Loaded to Failure by a Strip Footing Near the Crest, 54th Canadian Geotechnical Conference, Calgary, Alberta, 16-18 September 2001, pp. 481-489
  60. Esfehani, M. and Bathurst, R.J., Reduced-scale testing of Reinforced Soil Retaining Walls with Non-select Fills, 54th Canadian Geotechnical Conference, Calgary, Alberta, 16-18 September 2001, pp. 688-695
  61. Saunders, D.D., Walters, D.L., Bathurst, R.J. and Allen, T.M., The Influence of Reinforcement Stiffness on the Performance of Full-scale Reinforced Soil Segmental Retaining Walls, 54th Canadian Geotechnical Conference, Calgary, Alberta, 16-18 September 2001, pp. 696-704
  62. Bathurst, R.J., Saunders, D.D., and Walters, D.L., Masonry Block Reinforced-Soil Retaining Walls: A New Technology, 9th Canadian Masonry Conference, Fredericton, NB, June 2001, 12 p.
  63. Hatami, K. and Bathurst, R.J., Investigation of Seismic Response of Reinforced Soil Retaining Walls, 4th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, San Diego, CA USA March , 2001, Paper no. 7.18 (8p on CD)
  64. Hatami, K., Bathurst, R.J., Di Pietro, P. and Bianco, P.M., Numerical Study of Retaining Walls with Non-Uniform Reinforcement, Proceedings of EuroGeo 2, Bologna, Italy, 15-18 October 2000, Vol. 1, pp. 219-224
  65. Walters, D.L., Hatami, K., Bathurst, R.J., Vlachopoulos, N., Saunders, D., Burgess, G.P. and Allen, T.M. Full Scale Testing and Modelling of Geosynthetic Reinforced Soil Retaining Walls, 53rd Canadian Geotechnical Conference, Montreal, Quebec, 15-18 October 2000, pp. 1107-1114
  66. Bathurst, R.J., Implications of Full Scale Model Testing to Design of Geosynthetic-Reinforced Walls, 52nd Canadian Geotechnical Conference, Regina, Saskatchewan, 25-27 October 1999, pp. 83-90
  67. Chenaf, D., Stampfli, N., Chapuis, R.P. and Bathurst, R.J., Uniaxial compression tests on diesel contaminated frozen silty soil specimens, 52nd Canadian Geotechnical Conference, Regina, Saskatchewan, 25-27 October 1999, pp. 505-512
  68. Bathurst, R.J. and Hatami, K., Influence of Reinforcement Properties on Seismic Response and Design of Reinforced Soil Retaining Walls, 51st Canadian Geotechnical Conference, 5-7 October 1998, Edmonton, Alberta, Vol. 2, p. 479-486
  69. Bathurst, R.J. and Simac, M. Design and performance of the facing column for geosynthetic reinforced segmental retaining walls,International Symposium on Mechanically Stabilized Backfill, J. Wu (ed), Denver Colorado, 6-8 February 1997, Balkema, p. 193-208.
  70. Raymond, G.P., Bathurst, R.J., and Hajek, J., Geosynthetics Use in Cold Climate Pavement Drainage, 49'th Canadian Geotechnical Conference, St. Johns, Newfoundland, 23-25 September 1996, pp. 369-378
  71. Raymond, G.P., Bathurst, R.J., and Hajek, J., Evaluation of Geocomposite Edge Drain on Sand Subgrade, Geofilters'96, 2nd International Conference on Filtration and Drainage in Geotechnical Engineering, Montreal, Quebec, 29-31 May 1996, 10p.
  72. Bathurst, R.J. and Simac, M.R., Developments in Geosynthetic Reinforced Segmental Retaining Walls, 48'th Canadian Geotechnical Conference, 25-27 September 1995, Vancouver, BC, 8p.
  73. Bathurst, R.J. and Raymond, G.P., Repeated load stability of open graded highway aggregates, International Symposium on Unbound Aggregates in Roads UNBAR4, Nottingham (UK), 17-19 July 1995. pp. 95-104.
  74. Raymond, G.P., Bathurst, R.J. and Hajek, J., Evaluation of Highway Edge Drains Incorporating Geosynthetics, International Symposium on Unbound Aggregates in Roads UNBAR4, Nottingham (UK), 17-19 July 1995. pp. 75-85.
  75. Raymond, G.P., Bathurst, R.J., and Hajek, J., Geocomposite Edge Drain Evaluation on Ontario Highway 402 near Strathroy, 5th International Conference on Geotextiles, Geomembranes and Related Products, pp. 743-746, September 1994
  76. Karpurapu, G. and Bathurst, R.J., Finite Element Analysis of Geosynthetic-Reinforced Soil Walls, 13th ISSMFE Conference, New Delhi, pp.1381-1384, January 1994
  77. Bathurst, R.J., Investigation of Footing Restraint on Stability of Large-scale Reinforced Soil Wall Tests, 46'th Canadian Geotechnical Conference, Saskatoon, pp.389-398, September 1993
  78. Bathurst, R.J. and Raymond, G.P., Stability of Open-Graded Highway Aggregates, 45'th Canadian Geotechnical Conference, Toronto, pp. 8, 26-28 October 1992
  79. Raymond, G.P. and Bathurst, R.J., Dynamic Response of Aggregates in Relation to Track Quality Index, 45'th Canadian Geotechnical Conference, Toronto, pp. 10, 26-28 October 1992
  80. Bathurst, R.J., Geosynthetics for Reinforcement Applications in Retaining Walls, 44'th Annual Canadian Geotechnical Conference, Calgary, pp. 10, September-October 1991
  81. Karpurapu, R.G., Bathurst, R.J. and Jarrett, P.M., Finite Element Analysis of Incrementally Constructed Geogrid Reinforced Soil Walls, 44'th Annual Canadian Geotechnical Conference, Calgary, pp. 10, September-October 1991
  82. Rothenburg, L., Bathurst, R.J., and Berlin, A.A., Random Packing of Plane Elliptical Particles, Proceedings 7'th International Conference on Surface and Colloid Science, Union of Theoretical and Applied Chemistry, Compiegne, France, July 1991 (abstracts only)
  83. Bathurst, R.J. and Raymond, G.P., Performance of Open-Graded Drainage Layers Under Dynamic Plate Loading, 1991 CSCE Annual Conference, Vancouver, pp. 132-141, 29-31 May 1991
  84. Bathurst, R.J., Crowe, R.E. and Simac, M.R., Recent Innovations in Modular-Facing Retaining Wall Structures Using Geosynthetics, 1991 CSCE Annual Conference, Vancouver, pp. 142-151, 29-31 May, 1991
  85. Karpurapu, R.G. and Bathurst, R.J., Finite Element Analysis of Controlled Yielding Mechanism in Soil Retaining Wall Structures, CAN/CAM 91, pp. 618-619, 28 May - 1 June 1991.
  86. Bathurst, R.J. and Simac, M.R., Review of Three Instrumented Geogrid Reinforced Soil Retaining Walls, Geosynthetics: Design and Performance, Vancouver Geotechnical Society - 6th Annual One Day Symposium, pp. 15, 24 May 1991
  87. Crowe, R.E., Bathurst, R.J. and Alston, C., Design and Construction of a Road Embankment Using Geosynthetics, 42'nd Canadian Geotechnical Conference, pp. 266-271, October 1989
  88. Bathurst, R.J., Jarrett, P.M. and Lescoutre, S.R., An Instrumented Wrap-around Geogrid Wall, Third Canadian Symposium on Geosynthetics, Kitchener, Ontario, pp. 71-78, October 1988

SELECTED MAJOR REPORTS

  • Kondo, A., Takano, D., Kohama, E. and Bathurst, R.J. 2020. Development of Visualization Method of Inter-particle Force Distribution by Using Mechanoluminescent-coated Particle and Its Application. Port and Airport Research Institute (PARI), National Institute of Maritime, Port and Aviation Technology
    3-1-1 Nagase, Yokosuka, JAPAN (https://www.pari.go.jp/PDF/REPORT58-2-1.pdf) 19 p. (in Japanese)
  • Allen, T. M. and Bathurst, R. J., 2001, Prediction of Soil Reinforcement Loads in Mechanically Stabilized Earth (MSE) Walls, Washington State Department of Transportation, Report WA-RD 522.1, 353 pp. (revised 2003)
  • Allen, T. M. and Bathurst, R. J., 2001, Application of the K-Stiffness Method to Reinforced Soil Wall Limit States Design, Washington State Department of Transportation, Report WA-RD 523.1, 85 p. (revised 2003)
  • Raymond, G.P., Bathurst, R.J. and Hajek, J., Performance of Geotextile-Based Hydraulic Pavement Systems, Report to Ministry of Transportation of Ontario, Project No. 21214, January 1993, 150p.
  • Bathurst, R.J. and Raymond, G.P., Stability of Asphalt Cement Bound Open-graded Aggregate Layers, Ministry of Transportation of Ontario, Report PAV-91-04, December 1991, 24 p.
  • Hajek, J., Kazmierowski, T.J., Bathurst, R.J. and Raymond, G.P., Field Performance of Open Graded Drainage Layers, Ministry of Transportation of Ontario, Report PAV-91-01, June 1991, 39 p.
  • Bathurst, R.J. and Raymond, G.P., Stability of Unbound Open-Graded Aggregate Layers, Ministry of Transportation of Ontario, Report PAV-90-01, March 1990, 39 p.

BOOK REVIEWS

  • Bathurst, R.J. 2021. Book review on "Model Uncertainties in Foundation Design" by Chong Tang and Kok-Kwang Phoon. Boca Raton, FL: CRC Press (an imprint of Taylor & Francis Group), 2021. 589pp. ISBN: 978-0-367-11136-6 (hbk). ISBN: 978-0-367-68395-5 (pbk). ISBN: 978-0-429-02499-3 (ebk). Probailistic Engineering Mechanics 65: 103140 (https://doi.org/10.1016/j.probengmech.2021.103140).
  • Bathurst, R.J. 2017. Book Review on "Design guideline basal reinforced piled embankments" by S.J.M. van Eekelen and M.H.A. Brugman (eds), Geosynthetics International, Vol. 24, No. 1, 2017. (http://dx.doi.org/10.1680/jgein.2017.24.1.113)
  • Bathurst, R.J. 1997. Book Review on "Geosynthetic Engineering" by Holtz, R.D., Christopher, B.R. and Berg, R.R., Geosynthetics International, Vol. 4, No. 5, 1997.
  • Bathurst, R.J. 1995. Book Review on "Geofoam Geosynthetic" by J.S. Horvath, Geosynthetics International, Vol. 2, No. 5, pp. 893-894,1995.

SELECTED OTHER PUBLICATIONS

  • Rowe, K., Bathurst, R., Lafleur, J., Marcotte, M., Wallace, R. and Fannin, J. 2022. A brief history of geosynthetics in Canada. Canadian Geotechnique, Vol 3, No. 3, pages 23-25.
  • Bathurst, R.J. 2022. Migrating from factor of safety to ‘LRFD’ to ‘RBD’. Canadian Geotechnique, Vol 3, No. 2, pages 79-81.
  • Bathurst, R.J. 2019. Reliability-based design (RBD) for everyone (no Mone Carlo Simulation Required!). Special Issue on Computational Geotechnics. Geostrata Jan/Feb 2019. 
  • Miyata,Y., Takano,D., Nonoyama,H. and Bathurst, R.J. 2017. Geotechnical Testing Methods with Transparent Soils, JGS Monthly Magazine, 2017 (in Japanese
  • Bathurst, R.J. 2014. Reinforced Soil Walls Design and Construction. The Bridge and Structural Engineer, Vol. 44, Number 3, September 2014, pp. 15-24
  • Bathurst, R.J. Cai, Z. and Pelletier, M. 1996. Recent Research on Seismic Design and Performance of Geosynthetic Reinforced Segmental Retaining Walls, Geotechnical Fabrics Report, July/August 1996, 4p.
  • Raymond, G.P. Bathurst, R.J. and Hajek, J. 1996. Pavement Drainage - Not Simple, Geotechnical News, Vol 14, No. 2, June 1996, pp. 43-47.
  • Bathurst, R.J. and Simac, M.R. 1995. Software for Segmental Retaining Walls, Geotechnical Fabrics Report, September 1995, p. 20-21.
  • Simac, M.R. Bathurst, R.J. and Berg, R.R. 1993. New Design Guidelines for Segmental Retaining Walls, Geotechnical Fabrics Report, July/August 1993, p. 14-29
  • Abdelhalim, O.A., Haas, R., Walls, J., Bathurst, R.J. and Phang, W.A. 1985. A new method for effective reinforcement of asphalt pavements. Transportation Forum, 1985

Honours and Awards

  • 2024 Best Paper Award for paper published in 2023 in the journal Geotextiles and Geomembranes
  • 2024 Best Paper Award for paper published in 2023 in the journal Geosynthetics International
  • 2024 Honourable Mention for R.M. QUIGLEY AWARD for BEST PAPER published in the Canadian Geotechnical Journal in 2023
  • 2024-2025 ASCE Geo-Institute Cross USA Lecture Tour
  • 2024 JULIAN C. SMITH Medal of the Engineering Institute of Canada (EIC) "For achievement in the development of Canada"
  • 2023  IGS AWARD (International Geosynthetics Society) for a body of work with the themes of reliability-based design and analysis of geosynthetic mechanically stabilized earth (MSE) walls, load and resistance model calibration for internal limit states for these systems, load and resistance factor design (LRFD) calibration, and the migration to performance-based design and analysis of these systems based on probability theory and the concept of reliability index
  • 2023 Honorary Lifetime Member of the North American Chapter of the International Geosynthetics Society
  • 2023 Honourary Co-chair with Professor R.K. Rowe for 13th International Conference on Geosynthetics of the IGS to be held in Montreal in September 2026
  • 2022 Best Paper Award for paper published in 2021 in the journal Geotextiles and Geomembranes
  • 2022 Distinguished Lecture of the Soil Mechanics and Foundation Division of the Canadian Geotechnical Society (CGS)
  • 2022 Elected to Fellow of the Canadian Society for Civil Engineering
  • 2021 Awarded the International Geosynthetics Sociey (IGS) "Bathurst Lecture" in recognition of contributions in the area of soil reinforcement
  • 2021 ASCE Geo-Institute Thomas A. Middlebrooks Award for paper published in ASCE Journal of Geotechnical and Geoenvironmental Engineering
  • 2021 Georisk Most Cited Paper Award 2020 
  • 2021 Outstanding Reviewer for ASCE Journal of Geotechnical and Geoenvironmental Engineering 
  • 2020 Honourable Mention for R.M. QUIGLEY AWARD for BEST PAPER published in the Canadian Geotechnical Journal in 2019
  • 2020 Outstanding Paper/Report Award of the Port and Airport Research Institute (PARI) Japan
  • 2019 Editor's Choice paper - ASCE Journal of Geotechnical and Geoenvironmental Engineering
  • 2019 Editor's Choice paper - Canadian Geotechnical Journal
  • 2019 Honorary Foreign Member of the Japanese Geotechnical Society
  • 2018 Outstanding Reviewer for ASCE Journal of Geotechnical and Geoenvironmental Engineering 
  • 2017 Elected to FELLOW OF THE ROYAL SOCIETY OF CANADA
  • 2017 CRAMPTON PRIZE - BEST PAPER AWARD - ICE Geotechnical Engineering
  • 2017 RM HARDY Plenary Keynote Lecture of the Canadian Geotechnical Society delivered at 70th Annual Canadian Geotechnical Society Conference in Ottawa
  • 2017 SOWERS LECTURE Georgia Institute of Technology in Atlanta, Georgia
  • 2017 KERSTEN LECTURE University of Minnesota, Minnesota Geotechnical Society & Geo-Institute of ASCE, Minneapolis, Minnesota
  • 2016 LEGGET MEDAL of the Canadian Geotechnical Society
  • 2016 RMC Excellence in Research Award
  • 2016 CHBDC lecture tour in Ontario Canada
  • 2015 R.M. QUIGLEY AWARD from the Canadian Geotechnical Society for BEST PAPER published in the Canadian Geotechnical Journal in 2014
  • 2015 G.G. MEYERHOF AWARD of the Canadian Geotechnical Society
  • 2014 International Geosynthetics Society (IGS) Service Award
  • 2014 GIROUD LECTURE International Geosynthetics Society
  • 2014 BEST PAPER AWARD Geotextiles and Geomembranes
  • 2013 NSERC Discovery Grant Accelerator Supplement Grant
  • 2013 BEST PAPER AWARD (Honourable Mention) Geotextiles and Geomembranes
  • 2013 TECHNICAL ACHIEVEMENT AWARD of the Japan Chapter of IGS
  • 2013 ASTM HOGENTOGLER AWARD for BEST PAPER published in ASTM Geotechnical Testing Journal
  • 2012 BEST PAPER AWARD Soils and Foundations (Japanese Geotechnical Society)
  • 2011 BEST PAPER AWARD Geotextiles and Geomembranes
  • 2011 BEST PAPER AWARD Georisk
  • 2010 BEST PAPER AWARD (Honourable Mention) Geotextiles and Geomembranes
  • 2010 TECHNICAL ACHIEVEMENT AWARD of the Japan Chapter of IGS
  • 2010 GOLD MEDAL AWARD International Geosynthetics Society for technical contributions to design and performance of geosynthetic reinforced structures
  • 2009 GZOWSKI MEDAL of the Canadian Society for Civil Engineering for BEST PAPER published in 2008
  • 2009 JSPS Invitation Fellowship Program for Research in Japan (two months)
  • 2008 BEST PAPER AWARD for paper published in the Geosynthetics Engineering Journal of Japan Chapter of IGS
  • 2008 R.M. QUIGLEY AWARD from the Canadian Geotechnical Society for the BEST PAPER published in the Canadian Geotechnical Journal in 2007
  • 2007 R.M. QUIGLEY AWARD from the Canadian Geotechnical Society for the BEST PAPER published in the Canadian Geotechnical Journal in 2006
  • 2007 CGS Certificate of Appreciation for contributions to 4th CFEM
  • 2006 GZOWSKI MEDAL of the Canadian Society for Civil Engineering for BEST PAPER published in 2005
  • 2006 IGS Plaque for service to the IGS
  • 2005 BEST PAPER  AWARD Geotextiles and Geomembranes
  • 2004 Honourable Mention (runner-up) for GZOWSKI MEDAL of the Canadian Society for Civil Engineering for BEST PAPER published in 2003
  • 2004 Honourable Mention (runner-up) for R.M. QUIGLEY AWARD for BEST PAPER published in the Canadian Geotechnical Journal in 2003
  • 2004 Elected to Fellow of the Canadian Academy of Engineering
  • 2003 BEST PAPER AWARD North American Geosynthetics Conference
  • 2003 Canadian Geotechnical Society 2003 Cross Country Lecture (venues: Halifax, Quebec City, Montreal, Toronto, Saskatoon, Winnipeg, Edmonton, Prince George, Kelowna)
  • 2003 & 2000 A.G. Stermac Award for Outstanding Service to the Canadian Geotechnical Society
  • 2002-2004 Mercer Lecturer (ISSMGE-IGS-Tensar)
  • 2002 Canadian Geotechnical Society Geosynthetics Division Award
  • 2002 RMC Excellence in Research Award
  • 2001 Elected to Fellow of the Engineering Institute of Canada
  • 2000 BEST PAPER AWARD Geotextiles and Geomembranes
  • 2000 BEST PAPER AWARD GeoEng2000 Conference, Melbourne, Australia
  • 1998 GOLD MEDAL AWARD International Geosynthetics Society for technical contributions to developments in  seismic analysis, design and performance of geosynthetic reinforced structure
  • 1997 R.M. QUIGLEY AWARD from the Canadian Geotechnical Society for the BEST PAPER published in the Canadian Geotechnical Journal in 1996
  • 1994 GOLD MEDAL AWARD International Geosynthetics Society for technical contributions to the development of  geosynthetic reinforced segmental retaining walls
  • 1993 The Canadian Geotechnical Society Service Plaque for contributions to the 3rd Edition of the Canadian Foundation Engineering Manual
  • 1991 SEMIONOV PRIZE (Co-recipient) for fundamental research in physics. Awarded by the Russian Academy of Sciences

Research Interests

  • Geosynthetic and steel reinforced earth structures
  • Probabilistic design/analysis of reinforced and unreinforced soil structures
  • Limit states design of reinforced soil wall structures
  • LRFD calibration of reinforced soil wall structures
  • Seismic design of earth structures
  • Durability of geosynthetics
  • Unsaturated/saturated hydraulics of geosynthetics
  • Micromechanics of granular materials
  • Railroad track support 

Current

  • Dr. R.J. Bathurst (Research Director)
  • S. Wang (Ph.D. student Queen's)
  • B. Chen (Ph.D. student Queen's)

Recent graduate students or visiting students

  • F. Mahdavi Naftchali (Ph.D. student Queen's - 2023)
  • N. Shafiee (M.Sc. student Queen's - 2019)
  • K. Bohrer (visiting Ph.D student - Technological Institute of Aeronautics, San Paulo, Brazil - 2018-19)
  • H. Liu (visiting Ph.D. student - University of Geosciences, Wuhan, China - 2017-18)
  • N. Luo (Ph.D. student Queen's - 2017)
  • M. Bosse (M.Sc. student RMC - 2017)
  • D. Campbell (M.Sc. student RMC - 2017)
  • S. Javankhoshdel (Ph.D. - Queen's - 2016)
  • A. Chong (M.Sc. - RMC-2016)
  • B-H. Lin (visiting Ph.D. student - National Chi-Nan University, Taiwan)
  • F. Ezzein (Ph.D. - RMC - 2014)
  • M. Kargar (visiting Ph.D student - Amirkabir University of Technology, Iran 2014)
  • I.P. Damians (visiting Ph.D student - University of Barcelona 2011-12)
  • S. Zarnani (Ph.D. - Queen's - 2011)
  • B. Huang (Ph.D. - Queen's - 2010)
  • E. dos Santos (visiting Ph.D student - University of Brazilia 2008-09)
  • R. Gregg (MASc. RMC - 2008)
  • T. El-Kader (visiting PhD student - Zagazig University, Egypt - 2007)
  • B. Honig (MASc. RMC - 2006)
  • S. Althoff (visiting undergraduate student - University of Munster - Germany - 2006)
  • P. Linnenbaum (visiting undergraduate student - University of Munster - Germany - 2006)
  • A. Keshavarz (visiting Ph.D student -  Shiraz University - 2005)
  • K. Maia (visiting Ph.D student - University of Brazilia -2005-06)
  • M. Elbanna (MSc. Queen's - 2005)
  • R. Nelson (MSc. RMC - 2005)
  • J. Meleschuk (MSc. Queen's - 2004)
  • D. Walters (Ph.D. Queen's - 2004)
  • M. El-Emam (PhD. Queen's - 2003)
  • J. Reeves (MSc. RMC - 2003)
  • C. Leblanc (MSc. RMC - 2002)
  • D. Saunders (MSc. RMC - 2001)
  • A. Gaskin (MSc. Queen's - 2000)
  • N. Vlachopoulos (MSc. RMC - 2000)
  • A. Ho (MSc. Queen's - 2000)

Recent post-docs, visiting professors and researchers

  • Dr. Reza Chenari (Post-doc RMC)
  • Dr. S. Bozorgzadeh (Post-doc RMC)
  • Dr. P. Lin (Post-doc RMC)
  • Mr. T. Fujita (Public Works Research Institute - Japan)
  • Dr. Y. Yan (Post-doc RMC)
  • Dr. K-H. Yang (National Taiwan University of Science and Technology)
  • Dr. H. Ghiassian (visiting PDF - Iran University of Science and Technology - IUST)
  • Dr. J. Chen (visiting PDF - Tongji University - China)
  • Dr. H. Wei (visiting PDF - Hainan University - China)
  • Dr. D. Wang (visiting PDF - Yangtze University - China)
  • Dr. A. Nernheim (Visiting PDF - Clausthal University of Technology - Germany )
  • Dr. Y. Wang (visiting PDF - South China Unversity of Technolgy)
  • Dr. Y. Miyata (Japanese Defense Academy)
  • Dr. K. Hatami (University of Oklahoma)
  • Dr. M. Shinoda (University of Tokyo)
  • Dr. T. Linjin (Beijing Polytechnic University)
  • Dr. J. Blatz (University of Manitoba)
  • Dr. V. Kaliakin (University of Delaware)
  • Dr. W. Gao (visiting PDF - Hunan Unversity - China)
  • Dr. Y. Zhixin (Central South University of Forestry & Technology - China)
  • Ontario Ministry of Transportation (Highway Infrastructure Innovation Funding Program)
  • CFI
  • NSERC
  • Academic Research Program (ARP), Department of National Defence
  • Director of Infrastructure, Department of National Defence
  • USA State Departments of Transportation: Washington, Alaska, Arizona, California, Colorado, Idaho, Minnesota, New York, North Dakota, Oregon, Utah, and Wyoming
  • Amoco
  • Reinforced Earth Company
  • National Concrete Masonry Association, USA
  • Egyptian Government (Scientific Channel Program)
  • Short Course: Geosynthetic Reinforced Structures including Seismic Aspects. 12ICG Rome, 17 September 2023.
  • Webinar: Technical Forum of the Australian Chapter of the IGS (ACIGS), Cairns, Australia, 30 May 2023.
  • Short Course: MSE Walls, Design and Performance. Colombian Geotechnical Society, Cartagena, Colombia, 14 November 2022
  • Webinar: Iran Chapter of the International Geosynthetics Society (NA-IGS). 23 September 2022
  • Keynote: Innovative Solutions for Geotechnical Problems ”in Honour of Prof. Erol Guler” (ISGPEG-2020)", Istanbul, Turkey. June 2022
  • Keynote: National Seminar on Applications of Geosynthetics and Natural Fibres in Infrastructure Development IIT Madras, Chennai, India. June 2022
  • Webinar: Lecture 2 Fabricated Geomembrane Institute. 8 February 2022
  • Webinar: TC205 (Technical Committee) of the ISSMGE. 13 October 2021
  • Webinar: North American Chapter of the International Geosynthetics Society (NA-IGS). 23 September 2021
  • Webinar: Technical Forum #2 - Soil Reinforcement - Geo-Reinforcement. Australian Chapter of the IGS (ACIGS). 15 September 2021
  • Webinar: 1st lecture at Advancements in Geotechnical Engineering Research and Practice (AGERP) 2021 on 'Geosynthetics'. Australia. April 2021
  • Keynote: Online Symposium on Risk and Insurance of Engineering, China, 15 August 2021
  • Keynote: 6th International Conference on Geotechnical Research and Engineering (ICGRE'2021), Lisbon, Portugal. June 2021
  • Invited Lecture: Indonesian Chapter of the International Geosynthetics Society. 24 March 2021
  • Keynote: International Conference on Transportation Geotechnics towards Sustainability. Shastri Indo-Canadian Institute, 5-6 March, 2021
  • Webinar: Lecture 1 Fabricated Geomembrane Institute. 21 October 2021
  • Keynote: Shastri Indo-Canadian Institute Golden Jubilee Conference and Lecture Series, India, February 2021
  • Keynote: XIII Encontro GGGAITA 2020, Sao Paulo, Brazil, September 2020
  • Keynote: Indo-Canada Workshop on Interactive Design in Geotechnical Engineering: Theory to Practice, India, September 2020
  • Keynote: GeoMEast 2019. Sustainable Civil Infrastructures. Cairo, Egypt, November 2019.
  • Keynote: Indian Institute of Technology Kanpur & IGS Kanpur Local ChapterSymposium on Recent Advances in Sustainable Geotechnics, Kanpur, India, October, 2019
  • The Canadian Geotechnical Society, Southern Ontario Section, Toronto March 2019
  • First New Zealand Symposium, IGS Chapter of New Zealand (Christchurch and Auckland), New Zealand, 2017
  • Second Symposium of Geosynthetics Engineering, Mexico City, 2016
  • 1st Colombian Geosynthetics Conference, Bogota, Colombia, 2015
  • Annual Vancouver Geotechnical Society Symposium, 2015
  • First Latin America Seminar on Geofoam Applications, Mexico City, 2015
  • Plenary Keynote speaker (Giroud Lecture): 10th International Geosynthetics Conference, Berlin, September 2014
  • Keynote speaker: GeoAmericas 2012, Lima, Peru
  • Guest Editor: Special Issue on Geosynthetics, International Journal of Geomechanics, 2012
  • Keynote speaker: Earth Retention Conference, Bellevue, Washington, USA, August 2010
  • Invited Panel Speaker: 9th International Geosynthetics Conference, Guaruj, Brazil, May 2010
  • Invited speaker: British Geotechnical Association, Institution of Civil Engineers, October 2010
  • Invited Plenary Speaker: Recent developments in reinforced soil wall testing, analysis and design, The First African Regional Conference on Geosynthetics, GeoAfrica 2009, Cape Town , South Africa , September 2009
  • Keynote speaker: 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics, Goa, India, November 2008
  • Keynote speaker for MERCEA'08 - 2008 Seismic Engineering International Conference commemorating the 1908 Messina and Reggio Calabria Earthquake, Reggio Calabria, Italy, 2008
  • Keynote speaker for XIII PanAmerican ISSMGE Conference, Venezuela, 2007
  • Guest Editor: Special Issue on Geosynthetics in Harsh Environments, Geotextiles and Geomembranes, 2007
  • Keynote speaker for Indian Geotechnical Conference, Madras, 2006
  • Co-keynote speaker for 8th International Geosynthetics Conference, Yokohama, Japan, 2006
  • Keynote speaker for 2nd International Conference on Physical Modelling in Geotechnics, Hong Kong, 2006
  • General Reporter: 18th ISSMGE Conference, September 2005, Yokohama, Japan
  • Invited theme paper for 11th International Conference of the International Association for Computer Methods and Advances in Geomechanics, 19-24 June 2005, Torino, Italy
  • Keynote speaker for Canadian Young Geotechnical Engineers and Geoscientists Conference, Manoir St-Castin, October 27-30, 2004, Québec City, Québec, Canada
  • Mercer Lecture: 2003 NAGS Conference, 30 October 2003, WinnipegEuroGeo3, March 2004, Munich Germany; GeoAsia2004, June 2004, Seoul, Korea
  • Keynote speaker for First International Conference on Physical Modelling in Geotechnics, St. John's, Newfoundland, July 2002
  • Invited theme paper for 10th International Conference of the International Association for Computer Methods and Advances in Geomechanics, 7-12 January 2001, Tucson, Arizona
  • Special Plenary Lecturer for IS-Kyushu, November 2001
  • GeoAsia2000, Kuala Lampor, Malayasia, May 2000
  • ASCE GeoDenver2000, Boulder, Colorado, August 5-8, 2000
  • XII Italian National Conference on Geosynthetics, Bologna, Italy, 15 October 1999
  • 3rd Brazilian Symposium on Geosynthetics/1st South American Symposium on Geosynthetics, Rio de Janeiro, Brazil 20-22 October 1999
  • XI Brazilian Conference on Soil Mechanics and Geotechnical Engineering, Brasilia, Brazil, November 1998
  • '97 Geosynthetics Conference, 18th November 1997, Seoul, Korea
  • International Synposium on Mechanically Stabilized Backfill, Denver, Colorado , 6-8 February 1997
  • IS Kyushu'96- 3rd International Conference on Soil Reinforcement, 12-14 November 1996, Fukuoka, Kyushu, Japan
  • Geossinteticos'95, 26-28 June 1995, Sao Paulo, Brazil
  • 5th International Conference on Geotextiles, Geomembranes and Related Products, Singapore, 5-9 September 1994
* current
  • Editor-in-Chief: Geosynthetics International (Thomas Telford/ICE, UK)*
  • Editor-in-Chief: International Journal of Geomechanics (ASCE, USA)*
  • Associate Editor: Geotextiles and Geomembranes (Elsevier, UK)*
  • Editorial Board: ASTM Geotechnical Testing Journal (ASTM, USA)*
  • Editorial Board: Transportation Geotechnics (Elsevier, UK)*
  • Editorial Board: International Journal of Geosynthetics and Ground Engineering (Springer, Switzerland)*
  • Editorial  Board: Biogeotechnics (Elsevier Science Publishers Ltd, UK) *
  • International Technical Advisory Board (Editorial Board) of Geosynthetics (formerly Geotechnical Fabrics Report) published by the Industrial Fabrics Association International, USA*
  • Editorial Board: International Journal of GeoEngineering Case Histories (ISSMGE)
  • Editorial Board: Soils and Rocks (Brazilian and Portuguese Geotechnical and Engineering Geology Societies)
  • Editorial Board: Geomechanics and Engineering (Techno Press, Korea)
  • Computers and Geotechnics (Elsevier, UK)
  • President, Engineering Institute of Canada (2016-2018)
  • President, Canadian Geotechnical Society (2013-2014)
  • Past-President, International Geosynthetics Society
  • Past-President, North American Geosynthetics Society
  • Past-Vice-President Technical of the Canadian Geotechnical Society
  • Past-Chair, Geosynthetics Division of the Canadian Geotechnical Society
  • Committee Member (Geosynthetics) Canadian General Standards Board
  • Committee Member and Canadian Geotechnical Society Representative on TC-17, Ground Improvement, Reinforcement and Grouting, and TC-9, Earth Reinforcement, International Society of Soil Mechanics and Geotechnical Engineering